SE5169BLN-LF

Description The SE5169 series of fixed output low dropout linear regulators are designed for portable battery powered applications, which require low power consumption and low dropout voltage. Each device contains a bandgap voltage reference, an error amplifier, a PMOS power transistor, and resistors for setting output voltage, and current limit and temperature limit protection circuits. The SE5169 has been designed to be used with low cost capacitors and requires a minimum output capacitor of 1.0μF. The output voltages range from 1.3V to 4.4V in 100mV increments. Standard voltage versions are 1.5, 1.8, 2.5, 2.8, 3.0, and 3.3V. Features Typical 110mV Dropout Voltage at 150mA. Excellent Line and Load Regulation. High Accuracy Output Voltage of 2%. Ultra-Low Ground Current at 35μA (Typ.) Over Current and thermal Protection. No Reverse Current. Available in SOT-23-3L and TO-92 Packages 100% Lead (Pb)-Free Application USB removable devices MPEG4 devices Wireless LAN’s Hand-Held Instrumentation. Portable DVD players Digital camera Ordering/Marking Information Package Ordering Information 3.3V 2.8V 2.5V 1.8V 1.5V 3.0V 3.3V 2.8V 2.5V 1.8V 1.5V 3.0V SE5169ALN-LF SE5169BLN-LF SE5169CLN-LF SE5169DLN-LF SE5169ELN-LF SE5169FLN-LF SE5169ALG-LF SE5169BLG-LF SE5169CLG-LF SE5169DLG-LF SE5169ELG-LF SE5169FLG-LF 169AN_ 169BN_ 169CN_ 169DN_ 169EN_ 169FN_ 169AG_ 169BG_ 169CG_ 169DG_ 169EG_ 169FG_ Marking Information Starting with 1, a bar on top of 1 is for production year 2001, and underlined 1 is for year 2002. The next character is marked on top for 2003, and underlined for 2004. The naming pattern continues with consecutive characters for later years. The last character is the week code. (A-Z: 1-26, a-z: 27-52) A dot on top right corner is for lead-free process. LF: lead free. Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 1 Ordering/Marking Information (Continued) Package Ordering Information 3.3V 2.8V 2.5V 1.8V 1.5V 3.0V 3.3V 2.8V 2.5V 1.8V 1.5V 3.0V SE5169AHN-LF SE5169BHN-LF SE5169CHN-LF SE5169DHN-LF SE5169EHN-LF SE5169FHN-LF SE5169AHG-LF SE5169BHG-LF SE5169CHG-LF SE5169DHG-LF SE5169EHG-LF SE5169FHG-LF Marking Information SE5169AHN YYWW-LF SE5169BHN YYWW-LF SE5169CHN YYWW-LF SE5169DHN YYWW-LF SE5169EHN YYWW-LF SE5169FHN YYWW-LF SE5169AHG YYWW-LF SE5169BHG YYWW-LF SE5169CHG YYWW-LF SE5169DHG YYWW-LF SE5169EHG YYWW-LF SE5169FHG YYWW-LF YY: year code WW: week code. LF: lead free. Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 2 Absolute Maximum Ratings(1) Supply Input Voltage (VIN) ..…….……………… +6V Power Dissipation (PD) ……….. Internally Limited (3) Operating Ratings(2) Supply Input Voltage (VIN) …...……... +2.0V to +5.5V Junction Temperature (TJ) ……….….. 0°C to +125°C Package Thermal Resistance 160°C/W (TO-92) 250°C/W (SOT-23-3L) Junction Temperature (TJ) …….…………...... 150°C Lead Temperature (soldering, 5 sec.) …....…. 260°C Storage Temperature (TS) ……….. -40°C to +150°C Electrical Characteristics VIN = 5.0V; CIN = 2.2μF; COUT = 2.2μF; IOUT = 10mA; TJ = 25°C, unless otherwise specified. Symbol Parameter Conditions SE5169-1.5V (VIN=1.8V) SE5169-1.8V (VIN=3.3V) VOUT Output Voltage Accuracy SE5169-2.5V SE5169-2.8V SE5169-3.0V SE5169-3.3V ΔVOUT /ΔT ΔVOUT / VOUT ΔVOUT / VOUT Output Voltage Temperature Coefficient Line Regulation Load Regulation(5) Note 4 VIN = （VOUT +0.8）V to 5.5V VIN = (VOUT +0.8V) or 2.5V IOUT =10mA to 300mA IOUT =10mA VIN - VOUT Dropout Voltage (6) Min 1.470 1.764 2.450 2.744 2.940 3.234 ------------ Typ 1.5 1.8 2.5 2.8 3.0 3.3 0.1 0.2 1.0 8 110 250 150 20 61 35 500 Max 1.530 1.836 2.550 2.856 3.060 3.366 ------------ Units V mV/℃ %/V % IOUT =150mA IOUT =300mA mV TPROTECTION PSRR IGROUND ILIMIT Thermal Protection Ripple Rejection Ground Current Current Limit Thermal Protection Temperature Protection Hysterisys f =120Hz IOUT =10mA VOUT =0V ℃ ℃ dB μA mA Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 3 Note 1: Exceeding the absolute maximum rating may damage the device. Note 2: The device is not guaranteed to function outside its operating rating. Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD(MAX) = (TJ(MAX) - TA)/θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. See Table 1 and the “Thermal Considerations” section for details. Note 4: Output voltage temperature coefficient is the worst-case voltage change divided by the total temperature range. Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range from 100μA to 300mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Typical Application Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 4 Line Regulation (IOUT=10mA) Load Regulation (VIN=4.3V) 3.40 3.35 VOUT (V) 3.30 3.25 3.20 3.15 0 100 200 IOUT (mA) 300 400 3.40 3.35 VOUT (V) 3.30 3.25 3.20 3.15 3.60 4.10 4.60 5.10 VIN (V) IQ VS. IOUT(VOUT=3.3V) 32 30 IQ (μA) IQ (μA) 28 26 24 22 20 0 50 100 150 200 IOUT (mA) 250 300 350 27.5 27.0 26.5 26.0 25.5 25.0 3.6 IQ VS. VIN(VOUT=3.3V) 4.0 4.4 4.8 VIN (V) 5.2 5.6 Load Transient Response (VOUT = 3.3V) (IOUT=10mA to 300mA) Input Transient Response (VOUT = 3.3V) (VIN=3.6V to 5.0V) Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 5 Application Hints Like any low dropout regulator, SE5169 requires external capacitors to ensure stability. ensure performance. The external capacitors must be carefully selected to Thermal Considerations It is important that the thermal limit of the package is not exceeded. protection. to ground. The SE5169 has built-in thermal When the thermal limit is exceeded, The power dissipation for a given the IC will enter protection, and VOUT will be pulled application can be calculated as following: The power dissipation (PD) is PD = IOUT * [VIN – VOUT] The thermal limit of the package is then limited to PD(MAX) = [TJ – TA]/ΘJA where TJ is the junction temperature, TA is the ambient temperature, and ΘJA is around 250°C/W for SE5169. SE5169 is designed to enter thermal protection at 150°C. For example, if TA is 25°C then the maximum PD is limited to about 0.5W. In other words, if IOUT(MAX) = 300mA, then [VIN – VOUT] cannot exceed 1.67V. Input Capacitor An input capacitor of at least 1μF is required. Ceramic or Tantalum can be used. The value can be increase without upper limit. Output Capacitor An output capacitor is required for stability. It must be placed no more than 1 cm away from the VOUT pin, and connected directly between VOUT and GND pins. The minimum value is 1μF but may be increase without limit. Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 6 OUTLINE DRAWING SOT-23-3L C J B H DIM A B C D E F G H J K L N DIMENSIONS INCHES MM MIN MAX MIN MAX 0.110 0.047 0.083 0.035 0.070 0.018 0.015 0.0005 0.034 0.003 0.120 0.055 0.104 0.040 0.080 0.024 0.020 0.004 0.040 0.007 0.027 2.80 1.20 2.10 0.89 1.78 0.45 0.37 0.013 0.887 0.085 3.04 1.40 2.64 1.03 2.05 0.60 0.51 0.10 1.02 0.18 0.69 D A E F G K L OUTLINE DRAWING TO-92 A B D DIMN A B E F G H J K DIMENSIONS INCHES MM MIN MAX MIN MAX 0.175 0.170 0.500 0.016 0.045 0.095 0.080 0.125 0.205 0.210 0.610 0.021 0.055 0.105 0.105 0.165 4.445 4.318 12.70 0.407 1.143 2.413 2.032 3.175 5.207 5.334 15.50 0.533 1.397 2.667 2.667 4.191 E G F H K J Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 7 Customer Support Seaward Electronics Incorporated – China Section B, 2nd Floor, ShangDi Scientific Office Complex, #22 XinXi Road Haidian District, Beijing 100085, China Tel: 86-10-8289-5700/01/05 Fax: 86-10-8289-5706 Seaward Electronics Corporation – Taiwan 2F, #181, Sec. 3, Minquan East Rd, Taipei, Taiwan R.O.C Tel: 886-2-2712-0307 Fax: 886-2-2712-0191 Seaward Electronics Incorporated – North America 1512 Centre Pointe Dr. Milpitas, CA95035, USA Tel: 1-408-821-6600 Last Updated - 12/4/2008 Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice © Seaward Electronics Inc., 2006. • www.seawardinc.com.cn • Page 8