1N4006

1N4001 ~ 1N4007 Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free VOLTAGE 50 ~ 1000 V 1.0 A, Silicon Rectifiers FEATURES Low forward voltage drop High current capability High reliability High surge current capability DO-41 C A B PACKAGING INFORMATION Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.34 grams D A REF. A B C D Millimeter Min. Max. 25.4 (TYP) 4.10 2.00 0.70 5.21 2.72 0.90 MAXIMUM RATINS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. TYPE NUMBER Max. Repetitive Peak Reverse voltage Max. RMS Voltage Max. DC Blocking Voltage Max. Average Forward Rectified Current 0.375” (9.5 mm) Lead Length at TA = 75°C Peak Forward Sure Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Max. Instantaneous Forward Voltage at 1.0A Max. DC Reverse Current TA = 25°C At Rated DC Blocking Voltage TA = 100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance RθJA (Note 2) Storage temperature 1N 4001 1N 4002 1N 4003 1N 4004 1N 4005 1N 4006 1N 4007 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 V V V A 30 1.0 5.0 50 15 50 -65 ~ +150 A V µA pF ℃/W ℃ Notes: 1. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C. 2. Thermal Resistance from Junction to Ambient .375" (9.5mm) Lead Length. http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 1 of 2 1N4001 ~ 1N4007 Elektronische Bauelemente VOLTAGE 50 ~ 1000 V 1.0 A, Silicon Rectifiers RATINGS AND CHARACTERISTIC CURVES (1N4001 THRU 1N4007) FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 50.0 INSTANTANEOUS FORWARD CURRENT,(A) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length 10.0 5.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle AMBIENT TEMPERATURE,( C) 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 30.0 24.0 18.0 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 0.01 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE,(V) 12.0 6.0 0 FIG.3 - TYPICAL REVERSE CHARACTERISTICS 100.0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 10.0 Tj=100 C FIG.5-TYPICAL JUNCTION CAPACITANCE 35 JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, 30 25 20 15 10 5 0 0.01 0.05 0.1 0.5 1 REVERSE VOLTAGE,(V) 1.0 0.1 Tj=25 C 0.01 0 5 10 50 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 2 of 2