BL817

BL817 Elektronische Bauelemente 0.05A , 70V , 150mW High Density Mounting Type Photocoupler RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DESCRIPTION The BL817 Series of devices each consist of an infrared Emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in Wide-lead spacing and SMD option. A DIP4 B Top View FEATURES    Current transfer ratio (CTR：50%~600% @ IF=5mA, VCE=5V) High isolation voltage between input and output (Viso = 5000V rms) Creepage distance > 7.62mm N D L M F C H J K E Millimeter Millimeter REF. Min.. Max APPLICATIONS      REF. Min. Max. Programmable controllers System appliances, measuring instruments Telecommunication equipments Home appliances, such as fan heaters, etc. Signal transmission between circuits of different potentials and impedances A B C D E F 6.30 6.70 4.40 4.80 7.35 7.70 3.20 3.75 2° 8° 1.25 TYP. H J K L M N 2.60 3.00 0.20 0.30 8.65 9.35 0.50 TYP. 2.35 2.70 0.40 TYP. RANK TABLE OF CURRENT TRANSFER RATIO CTR Product-Rank Range(%) BL817-L 50~100 BL817-A 80~160 BL817-B 130~260 BL817-C 200~400 BL817-D 300~600 BL817 50~600 Note： 1. Conditions：IF=5mA, VCE=5V, TA=25°C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 23-Feb-2011 Rev. A Page 1 of 4 BL817 Elektronische Bauelemente 0.05A , 70V , 150mW High Density Mounting Type Photocoupler ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter Forward Current Input Reverse Voltage Power Dissipation Collector-Emitter Voltage Output Emitter-Collector Voltage Collector Current Collector Power Dissipation Total Power Dissipation Isolation Voltage 1 Symbol IF VR P VCEO VECO IC PC Ptot Viso VIOTM VIORM Topr Tstg Rating 50 6 70 70 6 50 150 200 5000 6000 630 -30~100 -55~125 260 Unit mA V mW V mA mW mW V rms V V °C Rated impulse isolation voltage Rated repetitive peak isolation voltage Operating Temperature Storage Temperature Soldering Temperature 2 Tsol Note： 1. AC For minute, R.H.=40~60%, Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Forward Voltage Input Reverse Current Terminal Capacitance Collector Dark Current Output Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current Current Transfer Ratio Collector-Emitter Saturation Voltage Isolation Resistance TRANSFER CHARACTERISTICS Floating Capacitance Cut-Off Frequency Response Time(Rise) Response Time(Fall) Note： 1. CTR = IC / IF x 100% 1 Symbol VF IR Ct ICEO BVCEO BVECO IC CTR VCE(sat) RISO CF fC tr tf Min. 35 6 2.5 50 5x1010 - Typ. 1.2 30 0.1 1x1011 0.6 80 4 3 Max. 1.4 10 250 100 30 600 0.2 1 18 18 Unit V μA pF nA V V mA % V Ω pF KHz μs μs Test Conditions IF=20mA VR=4V V=0, f=1KHz VCE=20V, IF=0 IC=0.1mA, IF=0 IE=10μA, IF=0 VCE=5V, IF=5mA IF=20mA, IC=1mA DC500V, 40~60%R.H. V=0, f=1MHz VCE=5V, IC=2mA, RL=100Ω, -3dB VCE=2V, IC=2mA RL=100Ω http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 23-Feb-2011 Rev. A Page 2 of 4 BL817 Elektronische Bauelemente 0.05A , 70V , 150mW High Density Mounting Type Photocoupler CHARACTERISTIC CURVE http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 23-Feb-2011 Rev. A Page 3 of 4 BL817 Elektronische Bauelemente 0.05A , 70V , 150mW High Density Mounting Type Photocoupler CHARACTERISTIC CURVE http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 23-Feb-2011 Rev. A Page 4 of 4