D5SB80

D5SB10 ~ D5SB100 Elektronische Bauelemente 100 V ~ 1000 V 6.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier RoHS Compliant Product A suffix of “-C” specifies halogen-free and RoHS Compliant D5-25SB FEATURES        Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 This Series is UL listed under the Recognized Component index, file number E231047 Single-in-line package High current capacity with small package Superior thermal conductivity High temperature soldering guaranted： 260°C / 10 seconds R High IFSM A GB N O P SLL MD H C J REF. F K E A B C D E G J F Millimeter Min. Max. 29.7 30.3 19.7 20.3 4.4 4.8 17.0 18.0 0.6 0.8 5 REF. 3.4 3.8 3.3 3.7 REF. K L N P O R S H Millimeter Min. Max. 2.6 2.8 7.3 7.7 2.3 2.7 0.9 1.1 2.0 2.4 3 X 45° 9.8 10.2 10.8 11.2 MAXIMUM RATINGS (TA=25℃ unless otherwise noted) PART NUMBERS PARAMETERS SYMBOL D5SB 10 RBV 602S 100 D5SB 20 RBV 603S 200 D5SB D5SB 40 60 RBV 604S 400 10 500 6 (1) 2.8 (2) 150 1.1 2.5 22 (2) 3.4 (1) 150 , -40 ~ 150 Rating Torque：0.8N.m RBV 605S 600 D5SB 80 RBV 606S 800 D5SB 100 RBV 607S 1000 UNITS Maximum repetitive voltage Maximum DC reverse current at @TA=25°C rated DC blocking voltage @TA=125°C Average rectified forward @TC=100°C current 60Hz Sine wave @TA=25°C Resistance load Peak Forward Surge Current 10ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @ 3.0A Dielectric strength terminals to case, AC 1 minute Current 1mA Maximum thermal on P.C.B without heat-sink Resistance per leg on AI plate heat-sink Operating and Storage Temperature Range Mounting torque VRM IR V A A IO IFSM VF Vdia RθJA RθJC TJ , TSTG Tor A V KV °C / W °C N.m Notes： (1) Unit case mounted on AI plate heat-sink (2) Unites mounted on P.C.B. without heat-sink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw {heat-sink size：10.5 * 8.2 * 0.3cm} http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 06-Aug-2010 Rev. A Page 1 of 2 D5SB10 ~ D5SB100 Elektronische Bauelemente 100 V ~ 1000 V 6.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 06-Aug-2010 Rev. A Page 2 of 2