FR101G

FR101G ~ FR107G Elektronische Bauelemente VOLTAGE 50 ~ 1000 V 1.0 A, Glass Passivated Fast Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Low forward voltage drop High current capability High reliability High surge current capability High speed switching DO-41 C A B MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.34 grams D A REF. A B C D Millimeter Min. Max. 25.4 (TYP) 4.10 5.21 2.00 2.72 0.70 0.90 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. PART NUMBERS SYMBOL FR FR FR FR FR PARAMETERS 101 G 102 G 103 G 104 G 105 G FR 106 G FR 107 G UNITS TESTING CONDITIONS Recurrent Reverse Voltage (Max.) RMS Voltage (Max.) DC Blocking Voltage (Max.) Instantaneous Forward Voltage(Max.) Average Forward Rectified Current (Max.) VRRM VRMS VDC VF IO 50 35 50 100 70 100 200 140 200 400 280 400 1.3 1.0 600 420 600 800 560 800 1000 700 1000 V V V V A IF = 1A 0.375” (9.5mm) lead length @ TA = 55°C 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Peak Forward Surge Current IFSM 30 5.0 100 150 15 -65 ~ 150 250 500 A DC Reverse Current (Max.) Reverse Recovery Time (Max.) Junction Capacitance (Typ.) Storage Temperature Range IR TRR CJ TSTG μA nS pF °C VR = VDC, TA=25°C VR=VDC, TA=100°C IF=0.5A, IR=1.0A, IRR=0.25A f=1MHz and applied 4V DC reverse voltage http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 1 of 2 FR101G ~ FR107G Elektronische Bauelemente VOLTAGE 50 ~ 1000 V 1.0 A, Glass Passivated Fast Rectifiers RATINGS AND CHARACTERISTIC CURVES (FR101G THRU FR107G) FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1.2 1.0 0.8 0.6 Single Phase 10 INSTANTANEOUS FORWARD CURRENT,(A) FR 10 1.0 1G ~F R 10 7G 0.4 0.2 0 0 Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length .1 Tj=25 C Pulse Width 300us 1% Duty Cycle 25 50 75 100 125 150 175 AMB IE N T E P E R ATUR E ( ) T M C .01 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 30 .001 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 24 FORWARD VOLT AGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50 NONINDUCTIVE 10 NONINDUCTIVE 18 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 12 6 (+) 25Vdc (approx.) () 1 NONINDUCTIVE OSCILLISCOPE (NOTE 1) D.U.T. ( ) PULSE GENERATOR (NOTE 2) (+) 0 1 1 5 0 50 100 NUMBER OF CYCLES AT 60Hz NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 35 trr +0.5A | | | | | | | | JUNCTION CAPACITANCE,(pF) 30 25 20 15 10 5 0 0 -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 100ns / cm .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 2 of 2