FR102

FR101 THRU FR107 Elektronische Bauelemente VOLTAGE 50V ~ 1000V 1.0 AMP Glass Passivated Fast Rectifier RoHS Compliant Product A suffix of "-C" specifies halogen-free DO-41 . Low Forward Voltage Drop . High Current Capability . High Reliability . High Surge Current Capability . High Speed Switching MECHANICAL DATA FEATURES .107(2.7) .080(2.0) DIA. 1.0(25.4) MIN. .205(5.2) .166(4.2) . Case: Molded Plastic . Epoxy: UL 94V-0 Rate Flame Retardant . Lead: Axial Lead, Solder Able per MIL-STD-202, . Polarity: Color Band Denotes Cathode End . Mounting Position: Any . Weight: 0.34 grams Method 208 Guaranteed .034(.9) .028(.7) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. O MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS TYPE NUMBER FR101 FR102 Maximum Recurrent Peak Reverse Voltage 50 100 Maximum RMS Voltage 35 70 Maximum DC Blocking Voltage 50 100 Maximum Average Forward Rectified Current, .375" (9.5mm) Lead Length at Ta = 55 Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current Ta = 25 at Rated DC Blocking Voltage Ta = 100 Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Reverse Recovery Time Test Condition: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C. FR103 FR104 FR105 FR106 FR107 200 140 200 400 280 400 1.0 30 1.3 5.0 100 600 420 600 800 560 800 1000 700 1000 UNITS V V V A A V µA 150 15 -65 ~ +150 -65 ~ +150 250 500 ns pF http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 2 FR101 THRU FR107 Elektronische Bauelemente VOLTAGE 50V ~ 1000V 1.0 AMP Glass Passivated Fast Rectifier RATING AND CHARACTERISTIC CURVES ( FR101 THRU FR107 ) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) 1.2 1.0 0.8 0.6 Single Phase FIG.1-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT,(A) FR 1.0 10 1~ FR 10 7 0.4 0.2 0 0 Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length .1 Tj=25 C Pulse Width 300us 1% Duty Cycle 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) .01 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 30 .001 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 24 FORWARD VOLT AGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50 NONINDUCTIVE 10 NONINDUCTIVE 18 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 12 6 (+) 25Vdc (approx.) () 1 NONINDUCTIVE OSCILLISCOPE (NOTE 1) D.U.T. () PULSE GENERATOR (NOTE 2) (+) 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 35 trr +0.5A | | | | | | | | JUNCTION CAPACITANCE,(pF) 30 25 20 15 10 5 0 -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 100ns / cm 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2