GBU8B

GBU8A ~ GBU8M Elektronische Bauelemente 50 V ~ 1000 V 8.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier RoHS Compliant Product A suffix of “-C” specifies halogen-free and RoHS Compliant GBU FEATURES        Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL listed under the Recognized Component index, file number E231047 Single-in-line package High current capacity with small package Superior thermal conductivity High temperature soldering guaranted： 260°C / 10 seconds High IFSM E P B N D O Q A F G L M K C H J REF. A B C D E F G H Millimeter Min. Max. 21.80 22.20 18.30 19.10 3.37 3.53 17.27 18.29 3.2 x 45° 3.70 3.90 5.70 5.90 2.30 2.70 REF. J K L M N O P Q Millimeter Min. Max. 0.46 0.56 4.80 5.30 2.16 2.54 1.65 2.03 1.45 1.85 0.90 1.20 9.80 10.20 10.90 11.10 MAXIMUM RATINGS (TA=25℃ unless otherwise noted) PART NUMBERS PARAMETERS Maximum repetitive voltage Maximum DC reverse current at @TA=25°C rated DC blocking voltage @TA=125°C Average rectified forward current 60Hz Sine wave Resistance load with heatsink @TC=100°C(1)(2) Peak Forward Surge Current, 10.0ms single half sine-wave superimposed on rated load Dielectric strength terminals to case, AC 1 minute Current 1mA Typical thermal resistance per leg (3) Maximum instantaneous forward voltage at 4A Operating and Storage Temperature Range SYMBOL VRM IR IO GBU 8A 50 GBU 8B 100 GBU 8D 200 GBU 8G 400 5 500 8 GBU 8J 600 GBU 8K 800 GBU 8M 1000 UNITS V A A IFSM Vdia RθJA RθJC VF TJ , TSTG 200 2.5 21 2.2 A KV °C / W 1 150 , -55 ~ 150 V °C Notes： (1) Unit case mounted on AI plate heat-sink (2) Unites mounted on P.C.B without heat-sink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with heat-sink size：8.2 * 8.2 * 03cm http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 04-Aug-2010 Rev. A Page 1 of 2 GBU8A ~ GBU8M Elektronische Bauelemente 50 V ~ 1000 V 8.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 04-Aug-2010 Rev. A Page 2 of 2