KS05V5

KS05V5 Elektronische Bauelemente RoHS Compliant Product VOLTAGE: 5.0 V 40 W Transient Voltage Suppressors Diode . Designed to protect voltage sensitive components from ESD. . Excellent clamping capability, low leakage and fast response. . Cellular phones, MP3 players, digital cameras ... etc. . Suitable for electronics where board space is a major design consideration. DESCRIPTION TSOP-6 .075(1.90) Ref .037TYP (0.95T YP) .023Re f (0.60)Re f .118(3.00) .102(2.60) .071(1.80) .055(1.40) 10 o 0 o . . Response time is typically < 1 ns . Low leakage . Stand-off voltage:5.0V . Ulta Low Capacitance : 22pF . IEC61000-4-2 level 4 ESD protection FEATURES (0.45)Ref .018 Ref .020(0.50) .012(0.30) .122(3.10) .106(2.70) .006(0.15) .003(0.08) .004(0.10) .000(0.00) .039(1.00) .018(0.70) .043(1.10) .035(0.90) Dimensions in inches and (millimeters) 6 5 4 1 2 3 Rating 25 C ambient temperature unless otherwise specified. o MAXIMUM RATINGS IEC61000-4-2, Level 4 (ESD) TYPE NUMBER Pack Pulse power tp=8/20us Pack Pulse Current tp=8/20us Lead Solder Temperature - Max. (10 sec duration) Thermal Resistance Junction-to-ambient Junction and Storage Temperature Range Total Power Dissipation on FR-5 board (Note 2) Air Contact SYMBOL Ppp Ipp TL R θJA TJ , TSTG PD LIMITS >15 >8 40 3.5 260 430 -55 ~ +150 150 UNITS kV W A o C C/W C mW o o Stresses exceeding "Maximum Ratings" may damage the device. "Maximum Ratings" are stress ratings only. Functional operation above the recommended. Operating conditions is not implied. Extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.62 in. 2. Only 1 diode under power. For all 4 diodes under power, PD will be 25%. Mounted on FR-4 board with min pad. ELECTRICAL CHARACTERISTICS TYPE NUMBER Reverse Stand-Off Voltage Reverse Leakage Current Peak Pulse Current Clamping Voltage Clamping Voltage Clamping Voltage Reverse Breakdown Voltage Test Current Diode Capacitance SYMBOL VRWM IR IPP VC VC Vc VBR IT Cd ( T = 25 o C unless otherwise noted, Per Diode) Min. Typ. Max. UNIT 5.0 V nA 10 35 A 3.5 9.5 V V 11 12 V 7.2 V 6.1 mA 1.0 22 28 pF TEST CONDITI ONS VRWM = 5 V IPP = 1 A IPP = 2.5A IPP = 3.5A IT = 1mA, F=1MHz,VR=0V. http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual Page 1 of 2 24-Aug-2007 Rev. A KS05V5 Elektronische Bauelemente VOLTAGE: 5.0 V 40 W Transient Voltage Suppressors Diode ELECTRICAL CHARACTERISTIC CURVES Pulse Waveform 110 100 90 80 Percent of Ipp 70 60 50 40 30 20 10 0 0 5 10 15 Time (uS) 20 25 30 0 Clamping Voltage vs. Peak Pulse Current Waveform Pa rameters tr = 8µs td = 20µs 15 Waveform Parameters tr = 8µs td = 20µ Clamping Voltage- Vc(V) e -t 10 td = IPP/2 5 0 1 2 3 4 5 6 Peak Pulse Current-Ipp(A) Application Information The SK05V5 is designed for the uni-direction of up to five lines of bi-derection protection of four lines from the damage caused by Electronic Discharge (ESD) and surge pulses. The SK05V5 may be used on line where the signal polarities are above or below ground. KS05V5 canwithstand and provides protection from a surge of 40 watts peakpulse power per line for a 8/20 us waveform High speed data line High speed data line Typical application for uni-directional protection of five lines Typical application for bi-directional protection of four lines http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual Page 2 of 2 24-Aug-2007 Rev. A