S2930-33

S2930-33 250mA Fixed Low Dropout Elektronische Bauelemente RoHS Compliant Product Voltage Regulator D TO-92 E S1 Description The S2930-33 is a positive voltage output, three-pin regulator which provides high output current even when the input/output voltage differential is small. The S2930-33 consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. A SEATING PLANE b1 Features * High Accurate: Output Voltage ±2. % * Max. Output Current: 250mA e1 e b C * Input Stability: Typ. 0.2%/V * CMOS Low Power Consumption: Type 3.3uA REF. A S1 b b1 C Applications * Radio Control systems * Voltage Reference Millimeter Min. Max. 4.45 4.7 1.02 0.36 0.51 0.36 0.76 0.36 0.51 L REF. D E L e1 e Millimeter Min. Max. 4.44 4.7 3.30 3.81 12.70 1.150 1.390 2.42 2.66 * Portable/Palm Top/Notebook Computers * Battery Powered Systems * Automotive Electronics * Cordless Telephones Block Diagram Typical Application Circuit http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 3 S2930-33 Elektronische Bauelemente 250mA Fixed Low Dropout Voltage Regulator Absolute Maximum Ratings Parameter Input Voltage Output Current Output Voltage Operating Ambient Temperature Stirage Temperature Continuous Total Power Dissipation Symbol VIN I O UT VO U T Topr Tstg PD Ratings 10 250 3.3 -30~+75 -30~+70 300 Unit V mA V o C C mW o Electrical Characteristics Ta=25 : S2930-33 VOUT (T) =3.3V (Note1) Parameter Symbol VOUT (E) Output Voltage (N ote2) Condition VIN=4.0V, IOUT=40m A VIN=4.3V, VOUT(E) 2.97V VIN=4.3V, IOUT=1m A to 80m A IOUT=80m A IOUT=150m A VIN=4.3V IOUT=40m A VIN=4.3V to 10V Mi n 3.234 250 - TYP 3.300 0.2 - Max 3.366 90 450 850 4.5 0.3 10 Unit V mA mV mV A %/ V V Max. Output Current Load Stability Input-Output Voltage Diff erential Supply Current Input Stability Input Voltage (Note3) IOUT max VOUT Vdif1 Vdif2 ISS VOUT VIN*VOUT VIN N ote 1: VOUT (T) =Specified O utput Voltage. 2: VOUT (E) =Eff ective O utput Voltage (i.e. the output voltage when “ VOUT (T) +1.0V” is pr ovided at the VIN pin while maintaining a certain IOUT value). ( Note4) 3: Vdif=VIN -VOUT (E) 4: VIN1=The input voltage at the time 98% of VOUT (E) is output ( input voltage has been gr adually r educ ed). (T)+1 to Test Circuit Circuit1 Circuit2 http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 2 of 3 S2930-33 Elektronische Bauelemente 250mA Fixed Low Dropout Voltage Regulator Characteristics Curve h tp://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 3 of 3