SBCR106S

SBCR103S Elektronische Bauelemente THRU SBCR107S VOLTAGE 200V ~ 1000V 1.0AMP Miniature Surface Mount Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. Case : SBCR 0.213(5.40) 0.205(5.20) 0.132(3.35) 0.128(3.25) 0.047(1.20) 0.039(1.00) 0.232(5.90) 0.224(5.70) FEATURES * Internal constructure with GPRC (glass passivated rectifier chip) * RoHS Compliant * Lead less chip form , no lead damage * Solder joint , no wire bond & lead frame * Low power loss , High efficiency * High current capability * Low profile package * For surface mounted applications * Built-in strain relief * High surge capability * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 R0 .2 ~ 0.037(0.95) 0.033(0.85) ~ 0.051(1.30) 0.043(1.10) MECHANICAL DATA Case : Packed with FRP substrate and epoxy underfilled Terminals : Tin plated, solderable per MIL-STD-750, Method 2026. Polarity : Laser Cathode band marking Weight : 0.07 gram *Dimensions in inches and (millimeters) Absolute Maximum Ratings Electrical Characteristics (Ta = 25 C unless otherwise specified) I T EM Max. repetitive peak reverse voltage Max. RMS voltage Max. DC blocking voltage Max. Average Forward Rectified Current o @ TA = 55 C Peak forward surge current 8.3ms single half sine-wave Superimposed on rated load (JEDEC method) o Symbol VRRM VRMS VDC IF(AV) SBCR103S 200 140 200 SBCR104S 400 280 400 SBCR105S 600 420 600 1.0 SBCR106S 800 560 800 SBCR107S 1000 700 1000 Unit V V V A IFSM IF = 0.4 A IF = 1.0 A @TC = 25 C o @TC = 150 C o 30 0.9 1.0 5 200 3.74 25 110 -55 to +175 o A Forward voltage Max. DC reverse current at rated DC blocking voltage VF V µA A2 s pF C/W o IR I2t Cj Rθ(JA) TJ, TSTG Current squared time for fusing (t < 8.3 ms) Typical junction capacitance per element (NOTE 1) Thermal resistance Operating junction and storage temperature Range C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Apr.-2005 Rev. A Page 1 of 2 SBCR103S Elektronische Bauelemente THRU SBCR107S VOLTAGE 200V ~ 1000V 1.0AMP Miniature Surface Mount Bridge Rectifier s RATINGS AND CHARACTERISTIC CURVES SBCR103S THRU SBCR107S FIG.1 - FORWARD CURRENT DERATING CURVE 1.2 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 30 20 10 0 0 25 50 75 100 125 o 0 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 TJ=100 C o 1.00 1.0 0.10 0.10 TJ=25 C o 0.01 0.2 TJ=25 C PULSE WIDTH=300uS o 0.01 1.6 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C o 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Apr-2005 Rev. A Page 2 of 2