SCDS101

SCDS101 THRU SCDS103 Elektronische Bauelemente VOLTAGE 50V ~ 200V 1.0 AMP Glass Passivated Super Fast Recovery Rectifier A suffix of "-C" indicates halogen-free & RoHS Compliant 1206 (SOD-123) FEATURES 0.083 (2.10) Classification 94V-0 Low profile package Built-in strain relief Metal to silicon rectifier , majority carrier conduction Low power loss , High efficiency High current capability High surge capacity RoHS Compliant Product 0.067 (1.70) 0.063 (1.60) Plastic package has Underwriters Laboratory Flammability 0.142 (3.60) 0.126 (3.20) 0.002 (0.05) 6 (0 .40) 01 R0. 0.035 (0.90) 0.020 (0.50) 0.035 (0.90) 0.020 (0.50) MECHANICAL DATA Case : Packed with FRP substrate and epoxy underfilled Terminals : Solder plated , solderable per MIL-STD-750, Method 2026 Polarity : Laser marking Weight : 0.02 gram 0.046 (1.16 0.034 (0.85 Dimensions in inches and (millimeters) Rating 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 2.0A (Note1) Maximum DC Reverse Current Ta=25℃ at Rated DC Blocking Voltage Ta=125℃ Maximum reverse recovery time Typical Junction Capacitance (Note 1.) Operating Temperature Range Storage Temperature Range NOTES: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2. Marking: SCDS101 : 77ZA SCDS102 : 77ZB SCDS103 : 77ZD MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SYMBOLS V RRM V RMS V DC I(AV) IFSM VF SCDS101 50 50 50 SCDS102 100 100 100 1 30 0.95 1 50 25 10 -50 ~ +125 -65 ~ +150 SCDS103 200 200 200 UNIT V V V A A V uA nS pF IR Trr Cj TJ T STG ℃ ℃ http://www.SeCoSGmbH.com/ 01-May-2006 Rev. B Any changing of specification will not be informed individual Page 1 of 2 SCDS101 THRU SCDS103 Elektronische Bauelemente VOLTAGE 50V ~ 200V 1.0 AMP Glass Passivated Super Fast Recovery Rectifier FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 30 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 25 20 15 10 5 0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.5 0 0 50 75 100 125 150 o 175 200 1 10 NUMBER OF CYCLES AT 60Hz 100 LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 PULSE WIDTH=300uS 1% DUTY CYCLE FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 1.00 10 0.10 1 TJ=100 C TJ=125 C o o 0.01 0.2 0.1 0.6 1.0 1.4 1.8 2.2 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS 200 JUNCTION CAPACITANCE, pF FIG.5 - TYPICAL JUNCTION CAPACITANCE TJ = 25 C o 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS http://www .SeCoSGmbH.com/ 01-May-2006 Rev. B Any changing of specification will not be informed individual Page 2 of 2