SCS05100V

SCS05100V Elektronische Bauelemente 0.5 A, 100 V Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free SOD-323 FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Forward Voltage D 1 Cathode Band H G 2 F C B A E J MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Solderable per MIL-STD-202, method 208 guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any REF. A B C D Millimeter Min. Max. 1.05 REF. 0.20 REF. 0.80 1.00 0.25 0.40 REF. E F G H Millimeter Min. Max. 0.080 0.180 1.15 1.45 1.60 1.80 2.30 2.70 MARKING CODE SH MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS(TA=25°C unless otherwise specified) PARAMETER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Average Forward Current @TJ=25°C Peak Forward Current @ 8.3 ms Half Sine Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 25°C Maximum Instantaneous Forward Voltage IFM = 0.5 A, TA = 125°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 125°C Typical Junction Capacitance(Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage temperature Notes: 1. Measured at 1MHZ and applied reverse of 0V DC. 2. FR-4 PCB, 2 oz. 0.65mm ×1.35mm copper pad. SYMBOL VRRM VRWM VR IF(AV) IFSM VF1 VF2 IR1 IR2 CJ RθJA TJ TSTG RATING 100 100 100 0.5 10 0.75 0.6 30 1 100 488 150 150 UNITS V V V A A V V uA mA pF °C/W °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 04-Dec-2009 Rev. A Page 1 of 2 SCS05100V Elektronische Bauelemente 0.5 A, 100 V Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES Typical Forward Characteristic 10 Typical Junction Capacitance Instantaneous Forward Current (A) 100 Junction Capacitance (pF) 75 1 125℃ 100℃ 75℃ 50℃ 0.1 50 25℃ 25 0 0 1 10 100 Revise Voltage (%) 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Forward Voltage (V) Typical Reverse Characteristic 1 125℃ Maximum Non- Repetitive Forward Surge Current 10 100℃ Peak Forwad surge Current (A) 8 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 0.1 6 Reverse Current(mA) 75℃ 4 0.01 2 50℃ 0 0 10 100 0.001 25℃ Number of Cycles at 60Hz 0.0001 10 30 50 70 90 110 Reverse Voltage(V) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 04-Dec-2009 Rev. A Page 2 of 2