SCS140P

SCS120P THRU SCS1100P Elektronische Bauelemente VOLTAGE 20 V ~ 100 V 1.0 A Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Forward Voltage PACKAGE DIMENSIONS SOD–123 PLASTIC PACKAGE A B C E MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Axial Leads, Solderable per MIL-STD-202 method 208 Guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any H D G J DIM A B C D E G H J MILLMETERS MIN MAX 3.55 3.85 2.55 2.85 1.40 1.80 -----1.25 0.30 0.78 0.15 ---------0.25 ----0.15 INCHES MIN MAX 0.140 0.152 0.100 0.112 0.550 0.071 -----0.049 0.120 0.031 0.006 ------------0.001 ------0.006 MARKING CODE SCS120P SCS140P SCS160P SCS1100P BR BM XG XH MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Peak Repetitive Peak reverse voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Average Forward Current @TJ=25°C Peak Forward Current @ 8.3 ms Half Sine Maximum Instantaneous Forward Voltage VF @ IFM = 1.0 A, TA = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 25°C Typical Junction Capacitance Operating Temperature Range Storage temperature SYMBOL VRRM VRWM VR IF(AV) IFSM VF IR CJ TJ TSTG SCS120P 20 SCS140P 40 SCS160P 60 1.0 10 SCS1100P 100 UNITS V A A 0.45 0.55 0.3 0.66 0.83 V mA pF °C °C 30 - 50 ~ + 150 - 65 ~ + 175 NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0 V D.C. 2. Thermal Resistance Junction to Ambient. http://www.SeCoSGmbH.com Any changes of specification will not be informed individually. 01-June-2008 Rev. E Page 1 of 2 SCS120P THRU SCS1100P Elektronische Bauelemente VOLTAGE 20 V ~ 100 V 1.0 A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.1 TYPICAL FORWARD CHARACTERISTICS FIG.2-JUNCTION CAPACITANCE 20 40 S1 60 P 10 6 4 2 20 P 60 P SC S1 S1 10 0P 40 20 pF 10 6 4 2 1 SC SC Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 0 .4 .6 .8 1.0 1.2 SC S1 .1 2 4 1 10 20 40 TJ =25 °C Volts 100 200 400 1000 Volts Instantaneous Forward Current - Ampsperes versus Instantaneous Forward Voltage - Volts FIG.3-FORWARD DERATING CURVE 1.2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 1.0 50 40 .8 Amps .6 .4 .2 30 20 10 0 1 2 4 8 10 20 40 60 80 100 1.4 FIG.4-PEAK FORWARD SURGE CURRENT Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 0 0 150 100 125 175 °C Average Forward Rectified Current - Amperes versus Juntion Temperature - °C 50 75 http://www.SeCoSGmbH.com Any changes of specification will not be informed individually. 01-June-2008 Rev. E Page 2 of 2