SCS220P

SCS220P THRU SCS240P Elektronische Bauelemente VOLTAGE 20 V ~ 40 V 2.0 A Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Forward Voltage PACKAGE DIMENSIONS SOD–123 PLASTIC PACKAGE A B C E MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Axial Leads, Solderable per MIL-STD-202 method 208 Guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any H D G J DIM A B C D E G H J MILLMETERS MIN MAX 3.55 3.85 2.55 2.85 1.40 1.80 -----1.25 0.30 0.78 0.15 ---------0.25 ----0.15 INCHES MIN MAX 0.140 0.152 0.100 0.112 0.550 0.071 -----0.049 0.120 0.031 0.006 ------------0.001 ------0.006 MARKING CODE SCS220P SCS230P SCS240P SJ SK SL MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Peak Repetitive Peak reverse voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Average Forward Current @TJ=25°C Peak Forward Current @ 8.3 ms Half Sine Maximum Instantaneous Forward Voltage VF @ IFM = 0.5 A, TA = 25°C VF @ IFM = 1.0 A, TA = 25°C VF @ IFM = 2.0 A, TA = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage @ TJ = 25°C Typical Junction Capacitance Operating Temperature Range Storage temperature SYMBOL VRRM VRWM VR IF(AV) IFSM VF SCS220P 20 SCS230P 30 2.0 10 SCS240P 40 UNITS V A A 0.38 0.45 0.65 0.40 0.47 0.68 1 215 -50 ~ + 125 -65 ~ + 150 0.42 0.50 0.72 V IR CJ TJ TSTG mA pF °C °C NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0 V D.C. 2. Thermal Resistance Junction to Ambient. http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2008 Rev. E Page 1 of 2 SCS220P THRU SCS240P Elektronische Bauelemente VOLTAGE 20 V ~ 40 V 2.0 A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.1-TYPICAL FORWARD CHARACTERISTICS FIG.2-JUNCTION CAPACITANCE 20 10 Capacitance PF S2 40 P 5 3 P 600 400 300 200 100 50 20 10 2 Forward Current Amps SC 1 S2 20 SC .1 2 4 1 T J=25°C 10 20 Reverse Voltage 40 50 60 0.4 0.1 0.04 0.01 0 0.5 0.7 0.8 0.9 Volts Instantaneous Forward Voltage - Volts 0.3 0.4 FIG.3-FORWARD DERATING CURVE 2.4 Single Phase, Half Wave 60Hz Resistive or Inductive Load 2.0 FIG.4-PEAK FORWARD SURGE CURRENT Peak Forward Surge Current Amps 50 40 30 20 10 0 1 5 10 30 50 100 Forward Current Amps 1.6 1.2 0.8 0.4 Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 0 0 150 100 125 175 °C Average Forward Rectified Current - Amperes versus Lead Temperature - °C 50 75 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2008 Rev. E Page 2 of 2