SCT316LD16C

SCT316LD Series Elektronische Bauelemente Description The SCT316LD series of monolithic Transient Voltage suppressors are designed for application where voltage transients, caused by electrostatic discharge (ESD) and other induced voltage surges, can permanently damage sensitive conponents. These TVS diodes are characterized by low capacitance while at the same time retaining their high surge capability, extremely fast response time and low dynamic resistance, The SCT324LD series consists of 8 monolithic bi-directional TVS diode arrays and is specifically designed to protect multiple or single data line with each channel being electrically independent for mutiple I/O port protection. 300W Transient Voltage Supperssors Array RoHS Compliant Product 16LD Package Application * ESD & surge protection for power lines & I/O ports * TTL and MOS Bus Lines * RS-422, RS-432 and RS485 data lines * High speed logic * High speed data & video transmission * Rosh compliant in Lead-Free Versions CONFIGURATION 16 15 14 13 12 11 10 9 Features * 300 watts Peak pulse power (tp=8 x 20us). * Protects up to 8 bi-directional line. * Standoff voltages from 3.3 to 36 volts. * ESD protection >30KV 1 2 3 4 5 6 7 8 Maximum rating and electrical characteristics Rating Peak ulse Power (tp=8/20us) Lead Soldering Temperature Operating Temperature Storage Temperature Symbol Ppk TL TJ TSTG Value 300 260 (10 sec.) -55 to +125 -55 to +150 Units Watts ℃ ℃ ℃ Electrical Characteristics Per Line @ 25º C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN CLAMPING VOLTAGE Vc, @ 1 Amp VOLTS MAX CLAMPING VOLTAGE Vc, @ 5 Amp VOLTS MAX LEAKAGE CURRENT ID,@ V WM µA MAX CAPACITANCE @0V, 1 MHz pF MAX PART NUMBER SCT316LD03C SCT316LD05C SCT316LD12C SCT316LD16C SCT316LD24C SCT316LD36C 3.3 5.0 12.0 15.0 24.0 36.0 4-5 6.1-7.4 13.3-16.9 16.7-20.4 26.7-32.6 40.0-47.0 7 9.8 19 24 43 60 8.5 11 24 30 55 75 100 12 0.5 0.5 0.5 0.5 700 420 150 130 60 60 NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage V WM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual SCT316LD Series Elektronische Bauelemente 300W Transient Voltage Supperssors Array Non-Repetitive Peak Pulse Power vs. Pulse Time 10 Power Derating Curve 110 Peak Puse Power - P PP (kW) % of Rated Power or I PP 100 90 80 70 60 50 40 30 20 10 1 0.1 0.01 0. 1 1 10 100 1 000 0 0 25 50 75 100 125 150 P u l se Du r a ti o n - tp (u s) A m bi ent Temper ature - TA ( o C) Pulse Waveform 110 100 90 80 Wave form Paramete rs: tr = 8 s td = 20 s Percent of I PP 70 60 50 40 30 20 10 0 0 5 10 e -t td = I PP /2 15 20 25 30 Time ( u s) http://www.SeCoSGmbH.com Any changing of specification will not be informed individual SCT316LD Series Elektronische Bauelemente 300W Transient Voltage Supperssors Array Out Drawing 5.82~6.20 0.86~1.26 9.80~10.20 1.37~1.73 0.10~0.25 0.33~0.51 1.27BSC 0 ~8 3.80~4.00 0.4~1.25 0.19~0.25 O O Suggested Pad Layout 1.27 TYP _ 0.76+0.13 _ 4.0+0.13 6.22 Min _ 1.14+0.13 All dimensions in Millimeters http://www.SeCoSGmbH.com Any changing of specification will not be informed individual