SD12

SD12 Elektronische Bauelemente 300 W, 12V Plasetic Encapsulate ESD Protection Diodes RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DESCRIPTION The SD12 is designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast response time provide best in class protection on designs that are exposed to ESD. Because of its small size, it is suited for use in cellular phones, MP3 players, digital cameras and many other portable applications where board space is at a premium. D SOD - 323 1 Cathode Band H G 2 F C B A E APPLICATIONS Stand-off voltage: 12V Low leakage Response time is typically < 1 ns ESD rating of class 3 (>16kV) per human body model IEC61000-4-2 level 4 ESD protection These are Pb-Free devices REF. A B C D Millimeter Min. Max. 1.05 REF. 0.20 REF. 0.80 1.00 0.25 0.40 J REF. E F G H Millimeter Min. Max. 0.080 0.180 1.15 1.45 1.60 1.80 2.30 2.70 DEVICE MARKING: ZC, 6U ABSOLUTE RATINGS (TA = 25°C ) RATING IEC 61000-4-2 (ESD) ESD voltage Total power dissipation on FR-5 Board (Note 1) Thermal Resistance Junction−to−Ambient Junction and Storage Temperature Range Air Contact per human body model PD RθJA TJ, TSTG SYMBOL VALUE ±15 ±8.0 30 200 625 -55 ~ +150 UNIT KV KV mW ° /W C ° C Lead Solder Temperature – Maximum (10 Second Duration) TL 260 ° C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the recommended. Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.62 in. ELECTRICAL CHARACTERISTICS (Ratings at 25° ambient temperature unless otherwi se specified. VF = 0.9V max at IF = 10mA for all types) C PARAMETER Working Peak Reverse Voltage (Max.) Maximum Reverse Leakage Current @ VRWM(Max.) Breakdown Voltage @ IT Max. Min. SYMBOL VRWM IR VBR IT VC IPP VC PPK C RATING 3.3 1.0 15.75 13.3 1.0 22 12 33 300 150 UNIT V µA V V mA V A V W pF Test Current Clamping Voltage @ IPP=5A Maximum Reverse Peak Pulse Current (Max.) * Clamping Voltage @ IPP (Max.) * Peak Power Dissipation * Max. Capacitance @ VR =0 and f =1MHz (Typ.) +Surge current waveform per Figure 1. 2. VBR is measured with a pulse test current IT at an ambient temperature of 25° C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 08-Feb-2010 Rev. B Page 1 of 3 SD12 Elektronische Bauelemente 300 W, 12V Plasetic Encapsulate ESD Protection Diodes RATINGS AND CHARACTERISTICS CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 08-Feb-2010 Rev. B Page 2 of 3 SD12 Elektronische Bauelemente 300 W, 12V Plasetic Encapsulate ESD Protection Diodes RATINGS AND CHARACTERISTICS CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 08-Feb-2010 Rev. B Page 3 of 3