SFP104

SFP104~SFP105 Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen-free ITO-220 10.05 0.05 Voltage 400 and 600 10.0AMP Super Fast Rectifier Diodes Description Designed for use in switching power supplies. Inverters and as free wheeling diodes. These state-of-the-art devices have the following feature. 3.2 0.05 4.3 0.05 0.15 3.1 6.6 0.1 0.05 Featur es * Low Power Loss, High Efficiency * Low Forward Voltage, High Current Capability * Low Stored Charge Majority Carrier Conduction * High Surge Capacity * Plastic Material Used Carries Underwriters Laboratory * Glass Passivated Chip Junctions * 150 C Operating Junction Temperature * High-Switching Speed 50 & 75 Nanosecond Recovery Time o 2.55 0.05 0 .6 2 .5 5 0.05 0.05 13.4 0 05 1 .2 0.05 15.1 2.7 0.05 0.6 2 .7 0.05 0.05 P IN 1 P IN 3 P IN 2 Dimensions in millimeters Maximum Ratings And Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Recitifier Forward Current (per leg) Total Device (Rated VR),TC=100 C Peak Repetitive Forward Current (Rate VR,Square Wave,20kHz,TC=125 C) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware,single phase, 60Hz) Operating and Storage Temperature Range Maximum Instantaneous Forward Voltage (IF= 5A, TC=25 C) (IF= 5A, TC=125 C) Maximum Instantaneous Reverse Current (Rated DC Voltage, TC=25 C) (Rated DC Voltage, TC=125 C) Reverse Recovery Time (IF=0.5A,IR=1.0,Irr=0.25A) Typical Junction Capacitance (Reverse Voltage of 4V & f=1MHz) Symbol VRRM VRWM VR VR(RMS) IF(AV) IFM IFSM Tj,Tstg VF IR Trr CP 70 1.30 1.16 5.0 200 50 60 SFP104 400 280 5.0 10 10 100 -65 ~ +150 1.50 1.38 SFP105 600 420 Unit V V A A A C V uA nS pF http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 2 SFP104~SFP105 Elektronische Bauelemente Voltage 400 and 600 10.0AMP Super Fast Rectifier Diodes FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE SFP104 SFP 105 LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA.) JUNCTION CAPACITANCE (PF) SFP105 SFP104 SFP104 SFP104 SFP105 SFP105 REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 10/20 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2