SJ1117A

SJ1117A 1A Low Dropout Positive Elektronische Bauelemente RoHS Compliant Product Adjustable or Fixed-Mode Regulator Description The SJ1117A is a low dropout at positive adjustable or fixed-mode regulator with min. of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. SJ1117A is also well suited for other applications such as VGA cards. SJ1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well regulated outputs of 1.25 to 5 with 6.4V to 12V input supply. TO-252 Features * 1.4V Max. Dropout Full Load Current * 3-Terminal Adjustable or Fixed 1.5V,1.8V,2.5V,3.3V,5.0V * Output Current Limiting * Good Noise Rejection * Fast Transient Response * Built-in Thermal Shutdown REF. A B C D E F S Applications * Communication Millmeter Min. Max. 6.40 6.80 5.20 5.50 6.80 7.20 2.20 2.80 2.30 REF. 0.70 0.90 0.60 0.90 REF. G H J K L M R Millmeter Min. Max. 0.50 0.70 2.20 2.40 0.45 0.55 0 0.15 0.90 1.50 5.40 5.80 0.80 1.20 * PC Peripheral Typical Circuit http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 4 SJ1117A Elektronische Bauelemente 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Block Diagram Pin Descriptions Name I/O Pin# Adj (GND) Vout Vin I O I 1 2 3 Function A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground only for fixed m ode) The output of the regulator. A minimum of 10uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator .Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response .This pin must always be 1.3V higher than Vout in order for the device to regulate properly. A b s o l u te M a x i m u m R a t i n g s Parameter DC Supply Voltage Power Dissipation Storage Temperature Range Operating Juction Temperature Range Symbol VIN PD TST TOP Ratings -0.3 to 12 Internally Limited -65~+150 0~+150 Unit V o o C C http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 2 of 4 SJ1117A Elektronische Bauelemente 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Electrical Characteristics PARAM ETER Refer ence Voltage SJ1117AADJ SJ1117A-1.5 SJ1117A-1.8 Output Voltage SJ1117A-2.5 SJ1117A-3.3 SJ1117A-5.0 Line Regulation SJ1117A-XXX SJ1117AADJ SJ1117A-1.5 Load Regulation SJ1117A-1.8 SJ1117A-2.5 SJ1117A-3.3 SJ1117A-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current Therm al Regulation Ripple Rejection CONDITIONS Io=10mA,Tj=25 ,(Vin-Vout )=1.5V Io=10mA,Tj=25 ,3V Vin 12V Io=10mA,Tj=25 ,3.3V Vin 12V Io=10mA,Tj=25 ,4V Vin 12V Io=10mA,Tj=25 ,4.8V Vin 12V Io=10mA,Tj=25 ,6.5V Vin 12V Io=10mA,Vout+1.5V