SL1117A_11

SL1117A Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen free 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator DESCRIPTION The SL1117A is a low dropout at positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. SL1117A is also well suited for other applications such as VGA cards. SL1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply. SOT-223 A M 4 Top View CB 1 2 3 K E L D F G Millimeter Min. Max. 6.30 6.70 6.70 7.30 3.30 3.70 1.42 1.90 4.60 REF. 0.60 0.80 H REF. G H J K L M J Millimeter Min. Max. 0.02 0.10 1.50 2.00 0.25 0.35 0.85 1.05 2.30 REF. 2.90 3.10 FEATURES       1.4Vmaximum dropout full load current Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V, 3.3V, 5.0V REF. A B C D E F APPLICATIONS   PC peripheral Communication MARKING Production A Line Vout 1117 Date Code  1.5V: -15 1.8V: -18 2.5V: -25 3.3V: -33 5.0V: -50 ADJ: Blank ADJ (Gnd) Vout Vin Production B Line Vout GS1117AX Date Code  1.5V: 15 1.8V: 18 2.5V: 25 3.3V: 33 5.0V: 50 ADJ: Blank ADJ (Gnd) Vout Vin PACKAGE INFORMATION Package SOT-223 MPQ 2.5K Leader Size 13’ inch http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 26-May-2011 Rev. B Page 1 of 4 SL1117A Elektronische Bauelemente 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator TYPICAL CIRCUIT BLOCK DIAGRAM PIN DESCRIPTIONS Name Adj (Gnd) VOUT O I/O Pin# 1 2 Description A resistor divider from this pin to the VOUT pin and ground sets the output voltage (Ground only for fixed mode) The output pin of regulator. A min. of 10μF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the min. dropout voltage during the load transient response. This pin must always be 1.3V higher than VOUT in order for the device to regulate properly. VIN I 3 ABSOLUTE MAXIMUM RATINGS Parameter DC Supply Voltage Power Dissipation (TA = 25°C) Operating, Storage Temperature Range Maximum Junction Temperature Symbol Vin PD TOPR, TSTG TMJ Ratings -0.3 to 15 850 0~125, -65~150 150 Unit V mW °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 26-May-2011 Rev. B Page 2 of 4 SL1117A Elektronische Bauelemente 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator ELECTRICAL CHARACTERISTICS Parameter Reference Voltage SL1117A-ADJ SL1117A-1.5 SL1117A-1.8 Test Conditions Io=10mA, TJ=25°C, (VIN - VOUT )=1.5V Io=10mA, TJ=25°C, 3.0V≦VIN≦12V Io=10mA, TJ=25°C, 3.3V≦VIN≦12V Io=10mA, TJ=25°C, 4.0V≦VIN≦12V Io=10mA, TJ=25°C, 4.8V≦VIN≦12V Io=10mA, TJ=25°C, 6.5V≦VIN≦12V Io=10mA, Vout+1.5V