SM0520FL

SM0520FL Elektronische Bauelemente VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES      Low profile package For surface mounted applications Ideal for automated placement Low power loss, high efficiency High temperature soldering： 250°C / 10 seconds at terminals SOD-123FL A B F MECHANICAL DATA     Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.006 ounces, 0.02 gram G C E D MARKING Product Marking Code REF. A B C D Millimeter Min. Max. 2.70 2.00 1.55 3.50 2.90 1.80 1.25 3.90 REF. E F G Millimeter Min. Max. 0.10 0.80 0.35 0.30 1.20 0.85 SM0520FL B2 PACKAGE INFORMATION Package SOD-123FL MPQ 2.5K LeaderSize 7’ inch MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETERS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at rated VR @ TL = 129°C Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load @ TL = 25°C Typical thermal resistance to ambient (NOTE 1) Typical thermal resistance to lead (NOTE 2) Operating Temperature Range Storage Temperature Range SYMBOL VRRM VRWM VR I(AV) IFSM RθJA RθJL TJ TSTG VALUE 20 20 20 0.5 6.5 200 25 -55 ~ 150 -55 ~ 150 UNITS V V V A A °C / W °C / W °C °C NOTES：1. Mounted on epoxy substrate with 3 x 3 mm CU pads (≧ 40 m thick). 2. Mounted with minimum recommended pad size, PC board FR4. http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 18-Nov-2010 Rev. A Page 1 of 3 SM0520FL Elektronische Bauelemente VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers PARAMETERS IF=0.1A, TJ=25°C Maximum instantaneous forward voltage (NOTE 3) IF=0.1A, TJ=100°C IF=0.5A, TJ=25°C IF=0.5A, TJ=100°C VR=10V, TJ=25°C Maximum DC reverse current at rated DC blocking voltage VR=10V, TJ=100°C SYMBOL MIN - TYP. - MAX 0.375 0.260 UNIT VF IR CT 0.440 0.360 40 3.0 150 7.0 110 V A mA A mA pF VR=20V, TJ=25°C VR=20V, TJ=100°C Max.junction capacitance (NOTE 4) NOTES：3. Pulse test < 300S, duty cycle < 2%. 4. VR = 5VDC (test signal range 100KHz to 1MHz) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 18-Nov-2010 Rev. A Page 2 of 3 SM0520FL Elektronische Bauelemente VOLTAGE 20 V 0.5 A Glass Passivated Surface Mount Rectifiers RATINGS AND CHARACTERISTIC CURVES (SM0520FL) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 18-Nov-2010 Rev. A Page 3 of 3