SM120FL

SM120FL ~ SM1100FL Elektronische Bauelemente VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES    Low forward surge current Ideal for surface mounted applications Low leakage current B SOD-123FL A F MECHANICAL DATA      Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any G C E D MARKING Product Marking Code Product Marking Code REF. A B C D Millimeter Min. Max. 2.70 1.80 1.55 3.50 2.90 2.00 1.25 3.90 REF. E F G Millimeter Min. Max. 0.10 0.80 0.35 0.30 1.20 0.85 SM120FL SM130FL SM140FL S2 S3 S4 SM160FL SM180FL SM1100FL S6 S8 SA PACKAGE INFORMATION Package SOD-123FL MPQ 2.5K LeaderSize 7’ inch MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PART NUMBERS PARAMETERS Recurrent Reverse Voltage (Max.) RMS Voltage (Max.) DC Blocking Voltage (Max.) Instantaneous Forward Voltage (Max.) Average Forward Rectified Current (Max.) Peak Forward Surge Current SYMBOL VRRM VRMS VDC VF I(AV) SM 120FL SM 130FL SM 140FL SM 160FL SM 180FL SM 1100FL UNITS V V V V A TESTING CONDITIONS 20 14 20 0.50 30 21 30 0.55 40 28 40 60 42 60 0.72 1.0 80 56 80 0.85 100 70 100 IFM = 1.0A TJ = 90°C 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 20 A http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 15-Dec-2010 Rev. B Page 1 of 3 SM120FL ~ SM1100FL Elektronische Bauelemente VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers Typical thermal resistance junction to 1 ambient Typical thermal resistance junction to 2 lead DC Reverse Current at Rated DC Blocking Voltage (Max.) Typical Junction Capacitance 3 RθJA RθJL IR CJ TJ TSTG 200 25 0.3 30 -55 ~ 125 -55 ~ 150 °C / W mA pF °C °C Operating Temperature Range Storage Temperature Range Notes： 1. 2. 3. Mounted on epoxy substrate with 3 x 3 mm CU pads (≧ 40  m thick). Mounted with minimum recommended pad size, PC Board FR4. Measured at f=1.0MHz, VR=4.0V http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 15-Dec-2010 Rev. B Page 2 of 3 SM120FL ~ SM1100FL Elektronische Bauelemente VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (SM120FL~SM1100FL) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 15-Dec-2010 Rev. B Page 3 of 3