SM3200A

SM3200A Elektronische Bauelemente VOLTAGE 200 V 3.0 A Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES      SMA High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Revise Current B A C MECHANICAL DATA      Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Axial Leads, Solderable per MIL-STD-202 method 208 Guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any REF. A B C D H D G E F PACKAGE INFORMATION Package SMA MPQ 5K LeaderSize 13’ inch Millimeter Min. Max. 1.25 1.65 3.99 4.60 2.50 2.90 1.98 2.44 REF. E F G H Millimeter Min. Max. 0.051 0.203 4.78 5.28 0.76 1.52 0.152 0.305 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified.Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Peak Repetitive Peak reverse voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Average Forward Current @TJ=25°C Peak Forward Current @ 8.3 ms Half Sine IFM = 3.0 A, TA = 25°C Maximum Instantaneous Forward IFM = 3.0 A, TA = 75°C Voltage IFM = 3.0 A, TA = 125°C Maximum DC Reverse Current At Rated DC TJ = 25°C Blocking Voltage 3 TJ = 100°C Typical Junction Capacitance 1 Typical Thermal Resistance 2 Voltage Rate of Chance (Rated VR) Operating Temperature Range Storage temperature Notes: 1. Measured at 1MHz and applied reverse voltage of 5.0 V D.C. 2. Thermal Resistance Junction to Case. 3. Pulse test: 300uS pulse width, 1% duty cycle. Symbol VRRM VRWM VR IF(AV) IFSM VF IR CJ RθJC dv/dt TJ TSTG Rating 200 200 200 3 80 0.85 0.75 0.68 50 500 60 25 1000 -50~150 -65~150 Unit V A A V μA pF °C / W V / μs °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 30-Mar-2011 Rev. B Page 1 of 2 SM3200A Elektronische Bauelemente VOLTAGE 200 V 3.0 A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 30-Mar-2011 Rev. B Page 2 of 2