SMF103A

SMF101A THRU SMF107A Elektronische Bauelemente VOLTAGE 50V ~ 1000V 1.0AMP Surface Mount Fast Recovery Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen-free SMA FEATURES * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Fast switching speed Dimensions in Dimensions in Inches 0.049 0.157 0.098 0.078 0.002 0.188 0.030 0.006 0.065 0.181 0.114 0.096 0.008 0.208 0.060 0.012 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.063 grams A B D C A B C D E F G H Millimeters 1.25 3.99 2.50 1.98 0.051 4.78 0.76 0.152 1.65 4.60 2.90 2.44 0.203 5.28 1.52 0.305 H E G F M AX IM U M R AT IN G S AN D E LE C T R IC AL C H AR AC T E R IS T IC S Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=55 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at Rated DC Blocking Voltage Ta=25 C Ta=125 C SMF101A SMF102A SMF103A SMF104A SMF105A SMF106A SMF107A UNITS 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 600 420 600 800 560 800 1000 700 1000 V V V A A 1.3 5.0 50 150 15 30 220 -65 ~ +150 1.5 1.7 V µA µA 250 500 nS pF C/W C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Thermal Resistance, Juntion to Lead (Note 3) Thermal Resistance, Juntion to Ambient (Note 3) Operating and Storage Temperature Range TJ, TSTG NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3. Rating applies when surface mounted on the minimum pad size recommended, PC Board FR-4. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Jun-2006 Rev. B Page 1 of 2 SMF101A THRU SMF107A Elektronische Bauelemente VOLTAGE 50V ~ 1000V 1.0AMP Surface Mount Fast Recovery Rectifiers RATING AND CHARACTERISTIC CURVES (SMF101A THRU SMF107A) FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 50 INSTANTANEOUS FORWARD CURRENT,(A) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 Single Phase Half Wave 60Hz Resistive Or Inductive Load 10 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle AMBIENT TEMPERATURE ( C) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) 50 0.1 .01 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLT AGE,(V) 40 FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE 30 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 20 10 (+) 25Vdc (approx.) () 1W NONINDUCTIVE OSCILLISCOPE (NOTE 1) D.U.T. () PULSE GENERATOR (NOTE 2) (+) 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 35 30 25 20 15 10 5 trr +0.5A | | | | | | | | 0 -0.25A JUNCTION CAPACITANCE,(pF) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Jun-2006 Rev. B Page 2 of 2