SMF105FL

SMF102FL ~ SMF107FL Elektronische Bauelemente Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES      SOD-123FL A B F Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction High temperature soldering: 260°C /10 seconds at terminals MECHANICAL DATA  G     Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any C E D REF. A B Millimeter Min. Max. 2.70 1.80 1.55 3.50 2.90 2.00 1.25 3.90 REF. E F G Millimeter Min. Max. 0.10 0.80 0.35 0.30 1.20 0.85 MARKING Product Marking Code Product Marking Code C D SMF102FL SMF103FL SMF104FL RB RD RG SMF105FL SMF106FL SMF107FL RJ RK RM PACKAGE INFORMATION Package SOD-123FL MPQ 2.5K Leader Size 7’ inch http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 09-May-2011 Rev. A Page 1 of 3 SMF102FL ~ SMF107FL Elektronische Bauelemente Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameters Recurrent Reverse Voltage (Max.) RMS Voltage (Max.) DC Blocking Voltage (Max.) Maximum Average Forward Rectified Current @TA = 65°C 1 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load TL=25°C Typical thermal resistance junction to ambient 2 Typical thermal resistance junction to lead 4 Maximum reverse recovery time 3 Operating Temperature Range Storage Temperature Range Symbol VRRM VRMS VDC I(AV) IFSM RθJA RθJC TRR Tj TSTG Part Number SMF 102FL SMF 103FL SMF 104FL SMF 105FL SMF 106FL SMF 107FL Unit V V V A A K/W K/W 100 70 100 200 140 200 400 280 400 1.0 20 180 40 600 420 600 800 560 800 1000 700 1000 150 250 -55~150 -55~150 500 ns °C °C Notes： 1. Averaged over any 20 ms period. 2 2. Thermal resistance junction to ambient, 6.0 mm copper pads to each terminal. 3. Measured with IF=0.5A, IR=1A, IRR=0.25A. 4. Thermal resistance junction to case. ELECTRICAL CHARACTERISTICS Parameters Maximum instantaneous 5 Maximum DC reverse current At rated DC blocking voltage Typical junction capacitance 6 Symbol VF IR IR CJ Min. - Typ. 4 Max. 1.3 10 50 - Units V μA μA pF Testing Conditions forward voltage @ 1.0A TA=25°C TA=125°C Notes： 5. Pulse test:300μs pulse width,1% duty cycle. 6. Measured at 1.0MHz and applied average voltage of 4.0V DC. http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 09-May-2011 Rev. A Page 2 of 3 SMF102FL ~ SMF107FL Elektronische Bauelemente Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers RATINGS AND CHARACTERISTIC CURVES (SMF102FL~SMF107FL) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 09-May-2011 Rev. A Page 3 of 3