SP10100_10

SP10100 Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen free VOLTAGE 100 V 10.0 Amp Schottky Barrier Rectifiers ITO-220 10 0.5 3.2 0.2 0.1 4.5 0.2 0.3 2.9 FEATURES      MECHANICAL DATA    3.7    Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 1.98 grams (approximate) 2.54 0.2 0.7 2.54 PIN 1 PIN 3 0.2 0.2 13Min 0.2 Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction 0.2 2.7 1.3 0.2 15 0.3 0.5 2.6 0.2 0.2 CASE PIN 2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL VRRM VRSM VDC IF IFSM VF IR CJ RJC dv / dt TJ TSTG SP10100 100 100 100 5 10 130 0.82 0.70 0.05 10 350 4.0 10000 -50 ~ +150 -65 ~ +175 UNITS V V V A A V Per Leg Per Device Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous IF = 5 A, TA = 25°C, per leg Forward Voltage IF = 5 A, TA = 125°C, per leg Maximum DC Reverse Current TA=25°C at Rated DC Blocking Voltage (Note 3) TA=100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. 3. Pulse Test：Pulse Width = 300 s, Duty Cycle ≦ 2.0%. mA pF °C /W V / s °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 13-Sep-2010 Rev. E Page 1 of 2 SP10100 Elektronische Bauelemente VOLTAGE 100 V 10.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (SP10100) http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 13-Sep-2010 Rev. E Page 2 of 2