SP20200

SP20200 VOLTAGE 200V Elektronische Bauelemente 20.0 AMP Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free IT O-220 FEATURES . Low forward voltage drop . High current capability . High reliability . High surge current capability . Epitaxial construction 3.7 0.2 10 0 .5 3.2 0.2 0.1 4.5 0.2 0 .3 2.8 0.2 2.7 MECHANICAL DATA 2.54 0 .2 0.7 2.54 PIN 1 PI N 3 0 .2 0.2 13Min 1.3 0 .2 15 0.3 0.5 2.6 0.2 0 .2 . Case: Molded plastic . Epoxy: UL 94V-0 rate flame retardant . Lead: Lead solderable per MIL-STD-202, method 208 guaranteed C ASE PI N 2 Dimensions in millimeters . Polarity: As Marked . Mounting position: Any . Weight: 2.24 grams(Approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 oC ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, See Fig. 1 Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage (IF = 10 Amps, TA = 25 C ) Maximum Instantaneous Forward Voltage (IF = 10 Amps, TA = 125 C ) Maximum DC Reverse Current Ta=25 At Rated DC Blocking Voltage Ta=125 Typical Junction Capacitance (Note 1) Typical Thermal Resistance R JA (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. O O SP20200 200 200 200 20.0 180 0.95 0.80 0.02 10 350 2.0 -50 ~ +150 -65 ~ +175 UNITS V V V A A V mA pF /W http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 1 of 2 SP20200 Elektronische Bauelemente VOLTAGE 200V 20 .0AMP Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES Typical Forward Current Derating Curve 15 Typical Forward Characteristic 100 Average Forward Current (A); per Leg 10 Instantaneous Forward Current (A),Per Leg 10 5 125℃ 75℃ 25℃ 1 0 20 50 100 150 190 Tc, Case Temperature (℃) Typical Junction Capacitance 800 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Forward Voltage (V) Junction Capacitance (pF) 600 400 Typical Reverse Characteristic 200 100 125℃ 0 0.1 1 10 100 100℃ Revise Voltage (%) 10 Reverse Current(uA) Maximum Non- Repetitive Forward Surge Current 200 75℃ Peak Forwad surge Current (A) 1 160 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 120 50℃ 0.1 80 25℃ 40 0.01 10 40 80 120 18 220 0 0 10 100 Reverse Voltage(V) Number of Cycles at 60Hz Any changing of specification will not be informed individua l http://www.SeCoSGmbH.com 01-Jun-2006 Rev. A Page 2 of 2