SR2150

SR2150 Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free VOLTAGE 150 V 2.0 Amp Schottky Barrier Rectifiers DO-15 FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction C A B MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-1 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 0.093 grams (Approximately) D A REF. A B C D Millimeter Min. Max. 25.4 (TYP) 5.80 7.62 2.60 3.60 0.90 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave Superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage (IF = 2 Amps, TA = 25°C) Maximum Instantaneous Forward Voltage (IF = 2 Amps, TA = 125°C) Maximum DC Reverse Current at Rated DC TA = 25°C Blocking Voltage (Note 3) TA = 125°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance RθJL (Note 2) Voltage Rate of Chance (Rated VR) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Lead. 3. Pulse test: 300us pulse width, 1% duty cycle. VALUES 150 150 150 2 50 0.85 0.78 0.2 2 50 10 10000 -50 ~ +150 -65 ~ +175 UNITS V V V A A V mA pF °C /W V/us °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-Nov-2010 Rev. A Page 1 of 2 SR2150 Elektronische Bauelemente VOLTAGE 150 V 2.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES Typical Forward Current Derating Curve 3 3 Typical Forward Characteristic Average Forward Current (A) 2 Instantaneous Forward Current (A) 2 1 125℃ 100℃ 1 75℃ 0 20 50 100 150 190 50℃ 25℃ 0.1 0.3 0.4 0.5 0.6 0.7 TL, Lead Temperature (℃) Typical Junction Capacitance 200 0.8 0.9 Forward Voltage (V) Junction Capacitance (pF) 150 100 Typical Reverse Characteristic 50 100 0 1 10 100 10 125℃ Revise Voltage (%) Reverse Current(uA) Maximum Non- Repetitive Forward Surge Current 100 100℃ 75℃ 1 50℃ Peak Forwad surge Current (A) 80 Tj = 2 5 ℃ 8.3mS Single half Sine Wave JEDEC Method 60 25℃ 0.1 40 20 0.01 10 40 70 100 130 160 0 0 10 100 Reverse Voltage(V) Number of Cycles at 60Hz http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-Nov-2010 Rev. A Page 2 of 2