SR8150E_09

SR8150E Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free VOLTAGE 150 V 8.0 Amp Schottky Barrier Rectifiers DO-27 FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction .220(5.6) .197(5.0) DIA. 1.0(25.4) MIN. MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-1 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 1.10 grams (Approximately) .052(1.3) .048(1.2) DIA. .375(9.5) .285(7.2) 1.0(25.4) MIN. Dimensions in inches and (millimeters) Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave Superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage (IF = 8 Amps, TA = 25°C) Maximum Instantaneous Forward Voltage (IF = 8 Amps, TA = 125°C) Maximum DC Reverse Current at Rated DC TA = 25°C Blocking Voltage TA = 125°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance RθJA (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Junction to Ambient. PCB mounted with5.0mm×5.0mm copper pad areas SR8150E 150 150 150 8 150 0.87 0.73 0.1 8 200 28 -50 ~ +150 -65 ~ +175 UNITS V V V A A V mA mA pF °C /W °C °C http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 12-Nov-2009 Rev. C Page 1 of 2 SR8150E Elektronische Bauelemente VOLTAGE 150 V 8.0 Amp Schottky Barrier Rectifiers ATINGS AND CHARACTERISTIC CURVES Typical Forward Current Derating Curve 15 Typical Forward Characteristic 100 Average Forward Current (A) 10 Instantaneous Forward Current (A) 10 125℃ 5 75℃ 0 20 50 100 150 190 1 25℃ Tc, Case Temperature (℃) Typical Junction Capacitance 400 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Junction Capacitance (pF) Forward Voltage (V) 300 200 Typical Reverse Characteristic 100 1 0 0 1 10 100 Revise Voltage (%) 0.1 125℃ 200 Reverse Current(mA) Maximum Non- Repetitive Forward Surge Current Peak Forwad surge Current (A) 75℃ 0.01 160 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 120 80 0.001 25℃ 40 0 0 10 100 0.0001 10 40 70 100 13 160 Number of Cycles at 60Hz http://www.SeCoSGmbH.com/ Reverse Voltage(V) Any changes of specification will not be informed individually. 12-Nov-2009 Rev. C Page 2 of 2