2N1617

2N1617 MECHANICAL DATA Dimensions in mm (inches) 1 9 .0 5 (0 .7 5 0 ) m in . NPN SILICON TRANSISTOR 1 7 .2 7 (0 .6 8 0 ) 1 0 .1 6 (0 .4 0 0 )  ! • Bipolar Power Transistor 1 5 .4 2 (0 .6 0 7 ) m ax. • TO–61 Hermetic Package • High Current Switching • LF Large Signal Amplification 2 .7 9 4 (0 .1 1 0 ) 1 1 .1 7 6 (0 .4 4 0 ) 7 .6 2 (0 .3 0 0 ) 8 .8 9 (0 .3 5 0 ) 2 .2 8 6 (1 /4 ”) UNF 2A TO–61 Metal Package. Pin 1 – Emitter Pin 2 – Base Case – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD TSTG , TJ Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current Total Device Dissipation Derate above 100°C Storage and Operating Junction Temperature Range 80V 70V 8V 5A 85W 570 mW/°C –65 to +175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5642 Issue 1 2N1617 Parameter ICBO Collector-Base cut-off current Tcase = 150°C Collector-Emitter cut-off current Test Conditions VCB = 80V IE = 0 Min. Typ. Max. Units 10 ICEX VCB = 80V VBE = -1V 1 mA IEBO Emitter-Base cut-off current VEB = 8V IC = 100mA IB = 1mA IC = 1mA VCE = 12V IC = 2A VCE = 12V VCE = 30V IC = 0 IB = 0 IC = 0 IE = 0 IC = 2A IB = 250mA IC = 2A IC = 300mA 3 70 8 80 15 1 V(BR)CEO* Collector-Emitter Breakdown Voltage V(BR)EBO* Emitter-Base Breakdown Voltage V(BR)CBO* Collector-Base Breakdown Voltage V 75 2 3 V MHz 1.75 °C/W - h21E VCEsat VBE Static Forward Current Transfer Ratio Collector-Emitter Saturation Voltage Base-Emitter Voltage Transition Frequency (f=1MHz) fT Rth(J-C) Thermal Resistance (junction to case) * Pulse test tp = 300µs , δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5642 Issue 1