2N3553

2N3553 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) NPN SILICON HIGH FREQUENCY TRANSISTOR 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS The 2N3553 is designed for amplifier and oscillator applications in military and industrial equipment. Suitable for use as output, driver or pre-driver stages in VHF equipment. FEATURES • Fast Switching • Low Leakage Current 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 45° TO-39 (TO - 205AD) Pin 1 – Emitter Pin 2 – Base Pin 3 – Collector ABSOLUTE MAXIMUM RATINGS(TA = 25°c unless otherwise stated) VCEO VCBO VEBO IC PD Tj , Tstg Collector – Emitter Voltage Collector – Base Voltage Emitter – Base Voltage Continuous Collector Current Total Device Disipation @ TCase = 25°C Derate above 25°C Operating and Storage Junction Temperature Range 40V 65V 4.0V 1A 7W 40mW/°C –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5619 Issue 1 2N3553 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter VCEO(sus) V(BR)EBO ICEO ICEX IEBO hFE VCE(sat) fT Cobo Pin Gpe N Test Conditions IC = 200mA IE = 0.1mA VCE = 30V VCE = 30V VCE = 65V VBE = 4V IC = 250mA IC = 250mA IC = 100mA f = 100MHz IE = 0 f = 100kHz Pout = 2.5W f =175MHz Pout = 2.5W f =175MHz Pout = 2.5W f =175MHz VCE = 28V VCE = 28V VCE = 28V VCB = 30V IC= 0 VCE = 1.0V IB = 50mA VCE = 28V IB = 0 IC = 0 IB = 0 TC = 200°C Min. 40 4.0 Typ. Max. Unit V Collector Emitter Sustaining Voltage Emitter Base Breakdown Voltage Collector Cut Off Current Collector Cut Off Current VBE(off) = 1.5V Emitter Cut Off Current DC Current Gain Collector Emitter Saturation Voltage Current Gain - Bandwidth Product Output Capacitance Power Input Common Emitter Amplifier Power Gain Collector Efficiency 0.1 5.0 1.0 0.1 10 1.0 500 8.0 10 0.25 10 50 — V MHz pF W dB % mA Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5619 Issue 1