2N3720

2N3720 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) PNP SILICON TRANSISTOR 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. FEATURES 5.08 (0.200) typ. • High Current Gain Bandwidth Product 2.54 (0.100) 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 3 • Hermetic TO39 Package 45° • Full Screening Options Available TO–39 (TO205AD) Underside View PIN 1 – Emitter PIN 2 – Base PIN 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC IC(cont) PD PD Tstg RθJA RθJC Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IB = 0) Collector Current Collector Current Continuous Total Device Dissipation TA = 25 °C Derate above 25°C Total Device Dissipation TC = 25 °C Derate above 25°C Storage Temperature Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case -60V -60V -4V -1A -3A 1W 5.71mW / °C 6W 34.3mW / °C –65 to 200°C 175°C/W 29°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6018 Issue 1 2N3720 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter V(BR)CEO ICBO ICEX IEBO VCE(sat) VBE(sat) Collector Cut-off Current Collector Cut-off Current Emitter Cut-off Current Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage Test Conditions IB = 0 IE = 0 VBE(off)=-2V VBE(off)=-2V IC = 0 IB =-100mA IB =-300mA IB =-100mA IB =-300mA VCE =-1.5V VCE =-1.5V VCE=-1.5V, VCB = -60V VCE = -60V VCE = -60V Tamb = 150°C VBE = -4V IC =-1A, IC =-3A, IC =-1A, IC =-3A, IC =-500mA, IC =-1A, IC =-1A, TC=-40°C Min -60 Typ Max -10 -10 -1.0 -1.0 -0.75 -1.5 -1.5 -2.3 Unit V μA μA mA mA V V Collector – Emitter Breakdown Voltage IC = -20mA 20 25 15 180 — hFE DC Current Gain DYNAMIC CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter fT Cobo Cibo ton toff Transition Frequency Output Capacitance Input Capacitance Turn on Time Turn off Time Test Conditions IC =-500mA VCB = -10V VEB = 0.5V VCE = -10V IE = 0 IC = 0 f = 30MHz f = 0.1MHz f = 0.1MHz Min. 60 Typ. Max. Unit MHz 120 1000 100 400 pF pF ns ns VCC=-12V,VBE(off) =0V,IC =1A,IB1 =0.1A VCC=-12V, IC =1A, IB1 = IB2=100mA (1) Pulse test : Pulse Width < 300μs ,Duty Cycle < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6018 Issue 1