2N4416DCSM

LAB SMALL SIGNAL DUAL N–CHANNEL J–FET IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS MECHANICAL DATA Dimensions in mm (inches) SEME 2N4416DCSM FEATURES 2.29 ± 0.20 (0.09 ± 0.008) 1.65 ± 0.13 (0.065 ± 0.005) 0.64 ± 0.06 (0.025 ± 0.003) 1.40 ± 0.15 (0.055 ± 0.006) • HERMETIC CERAMIC SURFACE MOUNT PACKAGE 4.32 ± 0.13 (0.170 ± 0.005) 2.54 ± 0.13 (0.10 ± 0.005) 2 1 A 3 4 5 • CECC SCREENING OPTIONS • SPACE QUALITY LEVELS OPTIONS 6 0.23 rad. (0.009) A = 1.27 ± 0.13 (0.05 ± 0.005) 6.22 ± 0.13 (0.245 ± 0.005) APPLICATIONS: Hermetically sealed surface mount version of the popular 2N4416 for high reliability / space applications requiring small size and low weight devices. (LCC2 PACKAGE) Underside View PAD 1 – Gate 1 PAD 2 – Source 1 PAD 3 – Drain 2 PAD 4 – Gate 2 PAD 5 – Source 2 PAD 6 – Drain 1 ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C unless otherwise stated) VGD VGS IG PD Tj Tstg Gate – Drain Voltage Gate – Source Voltage Gate Current Power Dissipation Derate Above 25°C Operating Junction Temperature Range Storage Temperature Range PER SIDE TOTAL DEVICE –30V –30V 10mA 350mW 2.8mW/°C 500mW 4.0mW/°C –55 to 150°C –55 to 150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3292 Issue 1 LAB ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter STATIC CHARACTERISTICS V(BR)GSS VGSS(off) IDSS* IGSS ID(off) VDS(on) RDS(on) Gate – Source Breakdown Voltage Gate – Source Cut–off Voltage Saturation Current Gate Reverse Current Drain Cut–off Current Drain – Source On Voltage Drain – Source On Resistance DYNAMIC CHARACTERISTICS RDS(on) CISS CRSS Drain – Source On Resistance Common – Source Input Capacitance VGS = 0V f = 1kHz VDS = 15V f = 1KHz VGS =0V VGS =0V f = 1MHz VDG = 10V en Equivalent Input Noise Voltage f = 1kHz VGS = 0V ID = 0mA 150 2.2 0.7 6 Ω pF pF nV √Hz SEME 2N4416DCSM Test Conditions VDS = 0V VDS = 15V VDS = 15V VGS = –15V VDS = 0V VDG = 10V VDS = 10V VGS = 0V VGS = 0V Tamb = 125°C VGS = –10V VGS = –6V ID = 3mA ID = 1mA IG = –1µA ID = 1nA VGS = 0V Min. –30 5 Typ. –35 –3 10 –0.6 2 0.25 150 Max. Unit V mA nA pA nA Ω –6 15 –1 –200 100 0.4 Common – Source Reverse Transfer VDS = 15V Capacitance * Pulse Test: PW ≤ 300 µs Duty Cycle ≤ 30% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3292 Issue 1