2N5096

2N5096 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) HIGH VOLTAGE PNP TRANSISTOR 6.10 (0.240) 6.60 (0.260) 38.00 (1.5) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. FEATURES • LOW SATURATION VOLTAGE • LOW LEAKAGE AT HIGH TEMPERATURE 5.08 (0.200) typ. • CECC SCREENING OPTIONS • SPACE QUALITY LEVELS OPTIONS 2.54 (0.100) • JAN LEVEL SCREENING OPTIONS 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 3 45° TO-5 (TO-205AA) PIN 1 – Emitter Underside View PIN 2 – Base PIN 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCER VCEO VCBO IC IB Ptot Tj Collector-Base Voltage (RBE = 1K ) Collector-Emitter Voltage (IB = 0V) Collector Base Voltage (IE = 0V) Collector Current Base Current Total Dissipation @ Tamb = 25°C Derate Above 100°C Operating And Storage Junction Temperature 500V 450V 500V 1A 0.5A 2W 20mW/°C -65 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 4058 Issue 1 2N5096 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter BVCEO* BVCER* BVCBO BVEBO ICBO IEBO hFE* Collector Emitter Breakdown Voltage Collector Emitter Breakdown Voltage Collector Base Breakdown Voltage Emitter Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current DC Current Gain Test Conditions IC=50mA IC=100µA IC=100µA IE=20µA VCB=500V VEB=4V IC=1mA IC=25mA IC=100mA VCE=10V VCE=10V VCE=15V IB=2.5mA IB=2.5mA VCE =20V RBE = 1K Min. 450 500 500 6 Typ. Max. Unit V 500 250 20 40 20 200 250 200 3.0 1.0 20 nA VCE(SAT)* VBE(SAT)* fT Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Current Gain Bandwidth Product IC=25mA IC=25mA IC=10mA f=5MHz V MHz SWITCHING TIMES (Tcase = 25°C unless otherwise stated) Parameter td tr ts tf Delay Time Rise Time Storage Time Fall Time Test Conditions VCC=150V IC=100mA IB1=IB2=10mA Min. Typ. Max. 700 1500 3 200 Unit ns µS ns * Pulsed: Pulse Duration = 300µs, duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 4058 Issue 1