2N5151XSMD05

MECHANICAL DATA Dimensions in mm (inches) 7.54 (0.296) 0.76 (0.030) min. 2.41 (0.095) 2.41 (0.095) 0.127 (0.005) 3.175 (0.125) Max. PNP BIPOLAR TRANSISTOR IN A CERAMIC SURFACE MOUNT PACKAGE FOR HIGH-REL AND SPACE APPLICATIONS 3.05 (0.120) 1 3 10.16 (0.400) 0.76 (0.030) min. 5.72 (.225) 2 DESCRIPTION The 2N5151XSMD05 is a silicon expitaxial planar PNP transistor in a Ceramic Surface Mount Package for use in Switching and Linear applications. 0.127 (0.005) 16 PLCS 0.50(0.020) 7.26 (0.286) 0.127 (0.005) 0.50 (0.020) max. SMD05 (TO-276AA) Underside View PAD 1 = Base PAD 2 = Collector PAD = 3 – Emitter ABSOLUTE MAXIMUM RATINGS TCASE = 25°c unless otherwise stated VCBO VCEO VEBO IC IC(PK) IB Ptot Tstg Tj Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Continuous Collector Current Peak Collector Current Base Current Total Dissipation at Tamb = 25°C Tcase = 25°C Operating and Storage Temperature Range Junction temperature -100V -80V -5.5V -5A -10A -2.5A 1W 100W –65 to +200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 4453 Issue 1 2N5151XSMD05 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter ICES ICEV ICEO IEBO Collector Cut Off Current Collector Cut Off Current Collector Cut Off Current Emitter Cut Off Current Test Conditions VCE = -60V VCE = -100V VCE = -60V VBE = 2V VCE = -40V VEB = -4V VEB = -5.5V IC = -100mA IC = -2.5A IC = -5A IC = -2.5A IC = -5A IC = -2.5A IC = -50mA IC = -2.5A IB = 0 IC = 0 IC = 0 IB = 0 IB = -250mA IB = -500mA IB = -250mA IB = -500mA VCE = -5V VCE = -5V VCE = -5V VCE = -5v VCE = -5V VBE = 0 VBE = 0 Tcase = 150°C Min. Typ. Max. -1 -1 -500 -50 -1 -1 Unit µA mA µA µA mA VCEO(SUS) Collector Emitter Saturation Voltage VCE(sat) VBE(sat) VBE Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Base Emitter Voltage -80 -0.75 -1.5 -1.45 -2.2 -1.45 20 30 20 15 250 20 — 3 0.5 1.3 µs µs pF 105 — V hFE DC Current Gain IC = -5A IC =2.5A CCBO Collector Base Capacitance Tcase = -55°C IE = 0 VCB = -10V f = 1MHz IC = -0.1A VCE = -5V VCE = -5v VCC = 30v VCC = 30V f = 1KHz IC = -0.5A f = 20MHz IC = -5A IB1 = -0.5A IC = -5A IB1=-IB2 = 0.5A hFE Small Signal Current Gain ton toff Turn On Time Turn Off Time * Pulse test tp = 300μs , δ < 2% THERMAL DATA Rthj-case Rthj-amb Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max 1.75 150 °C/W °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 4453 Issue 1