2N5153

2N5151 2N5153 MECHANICAL DATA Dimensions in mm (inches) 8.89 (0.35) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) HIGH SPEED MEDIUM VOLTAGE SWITCHES 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. DESCRIPTION The 2N5151 and the 2N5153 are silicon expitaxial planar PNP transistors in jedec TO-39 metal case intended for use in switching applications. 2.54 (0.100) 5.08 (0.200) typ. 2 1 0.66 (0.026) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 3 The complementary NPN types are the 2N5152 and 2N5154 respectively 45° TO-39 Pin 1 – Emitter Pin 2 – Base Pin 3 – Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25°c unless otherwise stated VCBO VCEO VEBO IC IC(PK) IB Ptot Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Continuous Collector Current Peak Collector Current Base Current Total Dissipation at Tamb = 25°C Tcase = 50°C Tcase = 100°C Tstg Tj Operating and Storage Temperature Range Junction temperature 2N5151 -100V -80V -5.5V -5A -10A -2.5A 1W 10W 6.7W 2N5153 –65 to +200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3071 Issue 1 2N5151 2N5153 THERMAL DATA Rthj-case Rthj-amb Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max 15 175 °C/W °C/W ELECTRICAL CHARACTERISTICS FOR 2N5151 (Tcase = 25°C unless otherwise stated) Parameter ICES ICEV ICEO IEBO Collector Cut Off Current Collector Cut Off Current Collector Cut Off Current Emitter Cut Off Current Test Conditions VCE = -60V VCE = -100V VCE = -60V VBE = 2V VCE = -40V VEB = -4V VEB = -5.5V IC = -100mA IC = -2.5A IC = -5A IC = -2.5A IC = -5A IC = -2.5A IC = -50mA IC = -2.5A IC = -5A IB = 0 IC = 0 IC = 0 IB = 0 IB = -250mA IB = -500mA IB = -250mA IB = -500mA VCE = -5V VCE = -5V VCE = -5V VCE = -5v VBE = 0 VBE = 0 Tcase = 150°C Min. Typ. Max. -1 -1 -500 -50 -1 -1 Unit µA mA µA µA mA VCEO(SUS) Collector Emitter Saturation Voltage VCE(sat) VBE(sat) VBE hFE Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Base Emitter Voltage DC Current Gain 80 -0.75 -1.5 -1.45 -2.2 -1.45 20 30 20 15 250 20 3 0.5 1.3 µs µs pF 90 V Tcase = -55°C IC =2.5A VCE = -5V CCBO hFE Collector Base Capacitance Small Signal Current Gain IE = 0 f = 1MHz IC = -0.1A f = 1KHz IC = -0.5A f = 20MHz ton toff Turn On Time Turn Off Time IC = -5A IB1 = -0.5A IC = -5A IB1=-IB2 = 0.5A VCC = 30V VCC = 30v VCE = -5v VCE = -5V VCB = -10V * Pulse test tp = 300µs , δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3071 Issue 1 2N5151 2N5153 ELECTRICAL CHARACTERISTICS FOR 2N5153 (Tcase = 25°C unless otherwise stated) Parameter ICES ICEV ICEO IEBO Collector Cut Off Current Collector Cut Off Current Collector Cut Off Current Emitter Cut Off Current Test Conditions VCE = -60V VCE = -100V VCE = -60V VBE = 2V VCE = -40V VEB = -4V VEB = -5.5V IC = -100mA IC = -2.5A IC = -5A IC = -2.5A IC = -5A IC = -2.5A IC = -50mA IC = -2.5A IC = -5A IB = 0 IC = 0 IC = 0 IB = 0 IB = -250mA IB = -500mA IB = -250mA IB = -500mA VCE = -5V VCE = -5V VCE = -5V VCE = -5v VBE = 0 VBE = 0 Tcase = 150°C Min. Typ. Max. -1 -1 -500 -50 -1 -1 Unit µA mA µA µA mA VCEO(SUS) Collector Emitter Saturation Voltage VCE(sat) VBE(sat) VBE hFE Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Base Emitter Voltage DC Current Gain 80 -0.75 -1.5 -1.45 -2.2 -1.45 50 70 40 35 250 50 3.5 0.5 1.3 µs µs pF 200 V Tcase = -55°C IC =2.5A VCE = -5V CCBO hFE Collector Base Capacitance Small Signal Current Gain IE = 0 f = 1MHz IC = -0.1A f = 1KHz IC = -0.5A f = 20MHz ton toff Turn On Time Turn Off Time IC = -5A IB1 = -0.5A IC = -5A IB1=-IB2 = 0.5A VCC = 30V VCC = 30v VCE = -5v VCE = -5V VCB = -10V * Pulse test tp = 300µs , δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3071 Issue 1