2N5154XSMD

2N5154XSMD MECHANICAL DATA Dimensions in mm (inches) 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 3 .6 0 (0 .1 4 2 ) M ax. 1 3 HIGH SPEED MEDIUM VOLTAGE SWITCH 0 .7 6 (0 .0 3 0 ) m in . 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 2 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) DESCRIPTION The 2N5154XSMD is a silicon expitaxial planar NPN transistors in a Ceramic Surface Mount Package for use in Switching and Linear applications. The 2N5154XSMD is also available with reverse Base, Emitter Connections 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1) 9) 6) 4) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD (TO-276AB) Underside View PAD 1 = Base PAD 2 = Collector PAD = 3 – Emitter ABSOLUTE MAXIMUM RATINGS TCASE = 25°c unless otherwise stated VCBO VCEO VEBO IC IC(PK) IB Ptot Collector – Base Voltage (IE = 0) Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Continuous Collector Current Peak Collector Current Base Current Total Dissipation at Tamb = 25°C Tcase = 50°C Tcase = 100°C Tstg Tj Operating and Storage Temperature Range Junction temperature 100V 80V 6V 5A 10A 1A 1W 10W 6.7W –65 to +200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6226 Issue 1 2N5154XSMD ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter ICES ICEV ICEO IEBO Collector Cut Off Current Collector Cut Off Current Collector Cut Off Current Emitter Cut Off Current Test Conditions VCE = 60V VCE = 100V VCE = 60V VBE = -2V VCE = 40V VEB = 4V VEB = 5.5V IC = 100mA IC = 2.5A IC = 5A IC = 2.5A IC = 5A IC = 2.5A IC = 50mA IC = 2.5A IB = 0 IC = 0 IC = 0 IB = 0 IB = 250mA IB = 500mA IB = 250mA IB = 500mA VCE = 5V VCE = 5V VCE = 5V Tc = -55°C VCE = 5V VCB = 10V VCE = 5V VCE = 5v VCC = 30v VCC = 30V VBE = 0 VBE = 0 Tcase = 150°C Min. Typ. Max. 1 1 500 50 1 1 Unit µA mA µA µA mA VCEO(SUS)* Collector Emitter Saturation Voltage VCE(sat)* VBE(sat)* VBE* Collector Emitter Saturation Voltage Base Emitter Saturation Voltage Base Emitter Voltage 80 0.75 1.5 1.45 2.2 1.45 50 60 25 30 250 50 3.5 — pF 200 — V hFE* DC Current Gain IC = 5A IE = 0 f = 1MHz IC = 0.1A f = 1KHz IC = 0.5A f = 20MHz CCBO hFE Collector Base Capacitance Small Signal Current Gain ton toff Turn On Time Turn Off Time IC = 5A IB1 = 0.5A IC = 5A IB1=-IB2 = 0.5A 0.5 µs 1.3 * Pulse test tp = 300µs , δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6226 Issue 1