2N5407

2N5404 2N5405 2N5406 2N5407 MECHANICAL DATA Dimensions in mm 8.89 (0.35) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) SMALL SIGNAL PNP TRANSISTORS IN TO-5 4.19 (0.165) 4.95 (0.195) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS Small signal PNP transistors for relay switching resistor logic circuits and general purpose applications. 2.54 (0.100) 5.08 (0.200) typ. 2 1 0.66 (0.026) 1.14 (0.045) 3 0.71 (0.028) 0.86 (0.034) 45° TO-5 Pin1 - Emitter Pin2 - Base Pin3 - Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) 2N5404 BVCBO BVCEO BVEBO IC(Max) IB(Max) PTOT TSTG , TJ Collector – Base Breakdown Voltage Collector – Emitter Breakdown Voltage Emitter – Base Breakdown Voltage Collector Current Base Current Total Power Dissipation (100°C Case) Operating and Storage Temperature Range Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. 2N5405 – 100V – 100V –6V -5A – 2A 5W 2N5406 – 80V – 80V – 6V – 5A – 2A 5W 2N5407 – 100V – 100V –6V -5A – 2A 5W – 80V – 80V – 6V – 5A – 2A 5W – 65°C to +200°C Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3075 Issue 1 2N5404 2N5405 2N5406 2N5407 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter ICEX Collector Cut-Off Current Test Conditions VCE =BVCEO VCE =BVCEO TC = 150°C VBE = 1.5V VBE = 1.5V 2N5404 2N5406 2N5405 2N5407 Min. Typ. Max. Unit – 10 – 500 µA VCEO(SUS) Collector-Emitter Sustaining Voltage With Base Open Collector Cut-Off Current IC = –100mA IB = 0 IC = –100mA IB = 0 VCE = – 50V VEB = – 4V IC = 0 IC = 0 VCE = – 5V VCE = – 5V IB = – 0.2A IB = – 0.2A f = 1MHz IC = – 0.2A –80 V –100 –100 –1 µA µA ICEO IEBO Common Emitter, Small-Signal Value hFE of the Short-Circuit Forward Current Transfer Ratio (f = 1KHz) VCE(SAT) Collector-Emitter Saturation Voltage VBE (SAT) IC = – 2A IC = – 2A IC = – 2A IC = – 2A VCB = – 10V VCE = – 5V IC = – 2A 2N5404 2N5405 2N5406 2N5407 20 40 60 – 120 –0.6 –1.2 150 V V pf MHz 0.5 µ Base-Emitter Saturation Voltage Collector Base Capacitance Transistion Frequency Rise Time DYNAMIC CHARACTERISTICS COBO ft tr 40 IB1 = – IB2 = 0.2A IC = – 2A 2N5404 2N5405 2N5406 2N5407 2N5404 2N5405 2N5406 2N5407 IB1 = – IB2 = 0.2A IC = – 2A IB1 = – IB2 = 2A IC = –2A IB1 = – IB2 = 2A 0.75 µ 1 0.2 µ 0.3 ts Storage time tf Fall Time IC = –2A IB1 = – IB2 = 2A * Pulse test : Pulse Width < 300µs ,Duty Cycle < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3075 Issue 1