2N5794

2N5794 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.335) 9.40 (0.370) 7.75 (0.305) 8.51 (0.335) 1.02 (0.040) Max. 12.7 (0.500) Min. DUAL NPN PLANAR TRANSISTORS IN TO77 PACKAGE 6.10 (0.240) 6.60 (0.260) 0.41 (0.016) 0.53 (0.021) 5.08 (0.200) 2.54 (0.100) 2.54 (0.100) 3 2 4 5 6 0.74 (0.029) 1.14 (0.045) 1 45˚ 0.71 (0.028) 0.86 (0.034) TO–77 PACKAGE (MO - 002AF) Underside View PIN 1 – Collector 1 PIN 2 – Base 1 PIN 3 – Emitter 1 PIN 4 – Emitter 2 PIN 5 – Base 2 PIN 6 – Collector 2 ABSOLUTE MAXIMUM RATINGS VCBO VCEO VEBO IC PD PD TSTG Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current Total Device Dissipation Total Device Dissipation Storage Temperature Range (Tamb = 25°C unless otherwise stated) EACH SIDE TOTAL DEVICE 75V 40V 6V 600mA 500mW 600mW 2.9mW / °C 3.4Wm/ °C 1.2W 2.0W 6.9mW / °C 11.43mW / °C –65 to 200°C TAMB = 25°C Derate above 25°C TC = 25°C Derate above 25°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6068 Issue 1 2N5794 ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter Test Conditions 1 IE = 0 IB = 0 IC = 0 IE = 0 IC = 0 IC = 100μA IC = 1mA IC = 10mA IC = 150mA IC = 150mA IC = 300mA IB = 15mA IB = 30mA IB = 15mA IB = 30mA VCE = 20V 35 50 75 50 100 40 0.6 1.2 1.8 0.3 0.9 V V 300 — Min. 75 40 6 10 10 nA nA nA V Typ. Max. Unit INDIVIDUAL TRANSISTOR CHARACTERISTICS IC = 10μA V(BR)CBO Collector – Base Breakdown Voltage V(BR)CEO* V(BR)EBO ICBO IEBO IC1-C2 Collector – Emitter Breakdown Voltage IC = 10mA Emitter –Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current Collector1-2 Leakage Current IE = 10μA VCB = 50V VEB = 4.0V VC1-C2 = ±50V VCE = 10V VCE = 10V hFE* DC Current Gain VCE = 10V VCE = 1.0V VCE = 10V VCE = 10V VBE(sat)* VCE(sat)* Base – Emitter Saturation Voltage Collector – Emitter saturation Voltage SMALL SIGNAL CHARACTERISTICS fT Ccb Ceb td tr ts tf Transition Frequency Collector - base Capacitance Emitter- base Capacitance SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time VCC = 30V IC = 150mA VCC = 30V IC = 20mA f = 100MHz IC =150mA IC =300mA IC =150mA IC =300mA ±1.0 250 8.0 25 15 30 250 60 MHz pF pF ns ns ns ns VCB = 10V IE =0 f =100kHz VEB = 0.5V IC =0 f =100kHz VBE(off) = 0.5V IB1 =15mA IC = 150mA IB1 = IB2 = 15mA * Pulse Width ≤ 300μs , Duty Cycle < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6068 Issue 1