2N6768

IRF350 2N6768 MECHANICAL DATA Dimensions in mm (inches) 39.95 (1.573) max. 30.40 (1.197) 30.15 (1.187) 17.15 (0.675) 16.64 (0.655) N-CHANNEL POWER MOSFET VDSS ID(cont) RDS(on) FEATURES • REPETITIVE AVALANCHE RATINGS • DYNAMIC DV/DT RATING 1 20.32 (0.800) 18.80 (0.740) dia. 7.87 (0.310) 6.99 (0.275) 1.78 (0.070) 1.52 (0.060) 11.18 (0.440) 10.67 (0.420) 26.67 (1.050) max. 4.09 (0.161) 3.84 (0.151) dia. 2 plcs. 2 400V 14A 0.300Ω • HERMETICALL SEALED • SIMPLE DRIVE REQUIREMENTS • EASE OF PARALLELING 1.09 (0.043) 0.97 (0.038) dia. 2 plcs. TO–3 (TO-204AA) Metal Package Pin 1 – Source Pin 2 – Gate Case – Drain ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VGS ID IDM PD EAS IAR EAR dv/dt TJ , Tstg Gate – Source Voltage Continuous Drain Current Pulsed Drain Current 1 Power Dissipation @ Tcase = 25°C Linear Derating Factor Single Pulse Avalanche Energy Avalanche Current 1 Repetitive Avalanche Energy Peak Diode Recovery 4 1 3 12.07 (0.475) 11.30 (0.445) ±20V (VGS = 0 , Tcase = 25°C) (VGS = 0 , Tcase = 100°C) 14A 9.0A 56A 150W 1.2W/°C 11.3mJ 14A 15mJ 4.0V/ns -55 to +150°C Operating and Storage Temperature Range Notes 1) Pulse Width ≤ 300μs, Duty Cycle ≤ 2% 2) Repetitive Rating – Pulse width limited by maximum junction temperature. 3) VDD = 50V ,Peak IL = 14A , Starting TJ = 25°C 4) ISD ≤ 14A , di/dt ≤ 145A/μs , VDD ≤ 400V, TJ ≤ 150°C , Suggested RG = 2.35Ω Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6252 Issue 1 IRF350 2N6768 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter BVDSS ΔBVDSS ΔTJ RDS(on) VGS(th) gfs IDSS IGSS IGSS Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf IS ISM VSD trr Qrr ton LD + LS STATIC ELECTRICAL RATINGS Drain – Source Breakdown Voltage Temperature Coefficient of Breakdown Voltage Static Drain – Source On–State Resistance Gate Threshold Voltage Forward Transconductance Zero Gate Voltage Drain Current Gate – Source Leakage Forward Gate – Source Leakage Reverse DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate – Source Charge Gate – Drain (“Miller”) Charge Turn–On Delay Time Rise Time Turn–Off Delay Time Fall Time Test Conditions VGS = 0V ID = 1mA Reference to 25°C ID = 1mA VGS = 10V ID = 9.0A VGS = 10V ID = 14A VDS = VGS ID = 250μA VDS ≥ 15V IDS = 9.0A VGS = 0V VDS = 320V TJ = 125°C VGS = +20V VGS = –20V VGS = 0V VDS = 25V f = 1MHz VGS = 10V ID = 14A VDS = 200V VDD = 200V ID = 14A RG = 2.35Ω Min. 400 Typ. Max. Unit V 0.46 0.300 0.400 4.0 V / °C Ω V S 25 250 +100 –100 (Ω) nA pF 110 18 65 35 190 170 130 14 56 1.7 1200 250 ns A V ns μC 2.0 6.0 μA 2660 680 250 52 5.0 25 nC SOURCE – DRAIN DIODE CHARACTERISTICS Continuous Source Current Pulse Source Current 2 IS = 28A TJ = 25°C Diode Forward Voltage 1 VGS = 0 Reverse Recovery Time IF = 28A TJ = 25°C 1 Reverse Recovery Charge di / dt ≤ 100A/μs VDD ≤ 50V Forward Turn–On Time PACKAGE CHARACTERISTICS Total Inductance (measured from the centre of drain pad to center of source pad) THERMAL CHARACTERISTICS Thermal Resistance Junction – Case Thermal Resistance Junction – Ambient (Typical socket mount) Negligible 6.1 0.83 30 nH RthJC RthJA °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6252 Issue 1