2N7225U1

IRFN250 2N7225U1 MECHANICAL DATA Dimensions in mm (inches) 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) N–CHANNEL POWER MOSFET 3 .6 0 (0 .1 4 2 ) M ax. 1 3 0 .7 6 (0 .0 3 0 ) m in . VDSS ID(cont) RDS(on) FEATURES 200V 27.4A 0.100Ω 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 2 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) • HERMETICALLY SEALED SURFACE MOUNT PACKAGE • SMALL FOOTPRINT – EFFICIENT USE OF PCB SPACE. 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1) 9) 6) 4) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) • SIMPLE DRIVE REQUIREMENTS • LIGHTWEIGHT • HIGH PACKING DENSITIES SMD 1 PACKAGE (TO-276AB) Pad 1 – Source Pad 2 – Drain Pad 3 – Gate Note: IRF250SMD also available with pins 1 and 3 reversed. ±20V ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VGS ID ID IDM PD EAS dv/dt TJ , Tstg TL RθJC Gate – Source Voltage Continuous Drain Current Continuous Drain Current Pulsed Drain Current 1 Power Dissipation @ Tcase = 25°C Linear Derating Factor Single Pulse Avalanche Energy Peak Diode Recovery 3 Operating and Storage Temperature Range Package Mounting Surface Temperature (for 5 sec) Thermal Resistance Junction to Case 2 (VGS = 0 , Tcase = 25°C) (VGS = 0 , Tcase = 100°C) 27.4A 17A 110A 150W 1.2W/°C 500mJ 5.0V/ns –55 to 150°C 300°C 0.83°C/W Notes 1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2% 2) @ VDD = 25V , L ≥ 1.3mH , Peak IL = 27.4A , Starting TJ = 25°C 3) @ ISD ≤ 27.5A , di/dt ≤ 190A/µs , VDD ≤ BVDSS , TJ ≤ 150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3352 Issue 2 IRFN250 2N7225U1 ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter BVDSS ∆TJ RDS(on) STATIC ELECTRICAL RATINGS Drain – Source Breakdown Voltage Breakdown Voltage Static Drain – Source On–State Resistance 1 Test Conditions VGS = 0 ID = 1mA VGS = 10V VGS = 10V VDS = VGS 1 Min. 200 Typ. Max. Unit V ID = 1mA ∆BVDSS Temperature Coefficient of Reference to 25°C ID = 17A ID = 27.4A ID = 250µA IDS = 17A VDS = 0.8BVDSS TJ = 125°C VGS = 20V VGS = –20V VGS = 0 VDS = 25V f = 1MHz VGS = 10V VDS = 0.5BVDSS ID = 22A 1 0.29 0.100 0.105 2 9 25 250 100 –100 3500 700 110 4 V / °C Ω V )Ω( S(Ω µA nA VGS(th) Gate Threshold Voltage gfs IDSS IGSS IGSS Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf IS ISM VSD trr Qrr ton Forward Transconductance VDS ≥ 15V VGS = 0 Zero Gate Voltage Drain Current Forward Gate – Source Leakage Reverse Gate – Source Leakage DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 1 Gate – Source Charge 1 Gate – Drain (“Miller”) Charge Turn–On Delay Time Rise Time Turn–Off Delay Time Fall Time pF ID = 22A 55 8 30 115 22 60 35 190 170 130 27.4 110 nC nC VDS = 0.5BVDSS VDD = 100V ID = 27.4A RG = 2.35Ω VGS = 10V ns SOURCE – DRAIN DIODE CHARACTERISTICS Continuous Source Current Pulse Source Current 2 A V ns µC Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn–On Time IS = 27.4A VGS = 0 IF = 27.4A TJ = 25°C TJ = 25°C Negligible 1.9 950 9.0 di / dt ≤ 100A/µs VDD ≤ 30V Notes 1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2% 2) Repetitive Rating – Pulse width limited by maximum junction temperature. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3352 Issue 2