BCY70

BCY70 BCY71 BCY72 MECHANICAL DATA Dimensions in mm (inches) 5.84 (0.230) 5.31 (0.209) 4.95 (0.195) 4.52 (0.178) GENERAL PURPOSE PNP SILICON TRANSISTOR 5.33 (0.210) 4.32 (0.170) DESCRIPTION The BCY70, BCY71 & BCY72 are silicon planar epitaxial PNP tranistors in Jedec TO18 metal case. 0.48 (0.019) 0.41 (0.016) dia. 2.54 (0.100) Nom. 3 2 1 TO18 PACKAGE(TO-206AA) PIN 1 – Emitter Underside View PIN 2 – Base PIN 3 – Collector BCY70 BCY71 BCY72 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) VCBO VCEO VEBO ICM Ptot TJ , TSTG Collector - Base Voltage (IE= 0) Collector - Emitter Voltage(IB= 0) Emitter - Base Voltage(IC= 0) Collector Peak Current Total Power Dissipation @ Tamb < 25°C Operating and Storage Junction Temperature Range 12.7 (0.500) min. -50V -40V -45V -45V –5V -200mA 350mW –65 to +200°C -25V -25V THERMAL DATA Rth-j-Case Rth-j-amb Thermal Resistance Junction -case Thermal Resistance Junction -ambient 150°C/W max 500°C/W max Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3297 Issue 1 BCY70 BCY71 BCY72 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions VCE = -20V VCE = -50V ICES Collector Cut-off Current (VBE = 0) VCE = -20V VCE = -45V VCE = -20V VCE = -25V IEBO VCE(sat)* Emitter Cutoff Current (IC = 0) Collector – Emitter Saturation Voltage VEB = -5V IC = -10mA IC = -50mA IC = -10mA VBE(sat)* Base – Emitter Saturation Voltage IC = -50mA IC = -0.1mA IC = -1mA IC = -10mA IC = -50mA IB = -1mA IB = -5mA IB = -1mA -0.6 -0.9 -1.2 40 45 50 15 60 80 90 100 15 40 50 100 15 MHz 250 200 8 pF 6 400 — 600 — V IB = -5mA BCY70 VCE = -1V VCE = -1V VCE = -1V VCE = -1V BCY71 IC = -0.01mA VCE = -1V hFE * Min. Typ. Max. Unit -10 -500 -100 -10 -100 -10 -10 -0.25 -0.5 nA nA µA nA µA µA V BCY70 BCY71 BCY72 BCY70 AND BCY71 ONLY DC Current Gain IC = -0.1mA IC = -1mA IC = -10mA IC = -50mA IC = -1mA IC = -10mA IC = -1mA f = 1KHz IC = -0.1mA f = 10.7MHz VCE = -1V VCE = -1V VCE = 1V VCE = -1V BCY72 VCE = - 1V VCE = -1V VCE = -10V VCE = -20V BCY71 VCE = -20V BCY70 VEB = -1V VCB = -10V hfe Small Signal Current fT Transition Frequency IC = -10mA f = 100MHz IC = 0 f = 1MHz IE = 0 f = 1MHz BCY71 and BCY72 CEBO CCBO Emitter-Base Capacitance Collector-Base Capacitance Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3297 Issue 1 BCY70 BCY71 BCY72 ELECTRICAL CHARACTERISTICS continued (TA = 25°C unless otherwise stated) Parameter Test Conditions IC = -0.1mA Rg = 2KΩ NF Noise Figure f = 10 to 10000 Hz BCY70 AND BCY71 BCY70 hie hre Input Impedance Reverse Voltage Ratio IC = -1mA f = 1kHz IC = -1mA f = 1kHz hoe Output Admittance IC = -1mA f = 1kHz IC = -10mA td Delay Time IB1 = -1mA BCY70 AND BCY72 ONLY IC = -10mA tr Rise Time IB1 = -1mA BCY70 AND BCY72 ONLY IC = -10mA ts Storage Time VEE = 3V 270 350 ns IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY IC = -10mA tf Fall Time VEE = 3V 50 80 ns IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY IC = -10mA ton Turn-on Time IB1 = -1mA BCY70 AND BCY72 ONLY IC = -10mA toff Turn-Off Time VEE = 3V 320 420 ns IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY VEE = 3V 48 65 ns VEE = 3V 25 35 ns VCE = -10V BCY71 ONLY VCE = -10V BCY71 ONLY VCE = -10V BCY71 ONLY VEE = 3V 23 35 ns 10 Min. Typ. Max. Unit VCE = -5V dB 6 2 2 12 20 x 10-4 60 KΩ — µS NOTES: * Pulse test: tp ≤ 300µs , δ ≤ 1% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3297 Issue 1