BDS29B

COMPLEMENTARY POWER DARLINGTON BDS28A/B/CM3A BDS29A/B/CM3A • • • • High DC Current Gain Hermetic Isolated TO-254AA Package Screening Options Available Designed for General Purpose Amplifier Applications ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated) PNP BDS28A NPN BDS29A BDS28B BDS29B BDS28C BDS29C VCBO VCEO VEBO IC IB PD TJ Tstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current Base Current TC = 25°C Total Power Dissipation at Derate Above 25°C Junction Temperature Range Storage Temperature Range 60V 60V 90V 120V 90V 120V 5V 30A 1.0A 150W 0.857W/°C -65 to +200°C -65 to +200°C THERMAL PROPERTIES Symbols RθJC Parameters Thermal Resistance, Junction To Case Min. Typ. Max. 1.16 Units °C/W Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. S emelab Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Document Number 9017 Issue 1 Page 1 of 3 Website: http://www.semelab-tt.com COMPLEMENTARY POWER DARLINGTON BDS28A/B/CM3A BDS29A/B/CM3A ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise stated) Symbols Parameters Test Conditions BDS 28A BDS 29A BDS 28B BDS 29B BDS 28C BDS 29C VCE= VCEO Max. IC = 100mA IB = 0 Min. 60 90 120 RBE = 1.0KΩ TC = 150°C Typ Max. Units V(BR)CEO (1) Collector-Emitter Breakdown Voltage V ICER IEBO ICEO VCE(sat) (1) Collector-Emitter Leakage Current Emitter Cut-Off Current Collector-Emitter Leakage Current Collector-Emitter Saturation Voltage Emitter-Base Saturation Voltage Forward-current transfer ratio 1.0 5 5 1.0 3 4 3.5 5 1000 200 V mA IC = 0 IB = 0 IC = 20A IC = 30A IC = 20A IC = 30A IC = 20A IC = 30A VBE = 5V VCE =50V IB = 0.2A IB = 0.3A IB = 0.2A IB = 0.3A VCE = 5V VCE = 5V VBE(sat) (1) (1) hFE DYNAMIC CHARACTERISTICS hfe (1) Small-Signal Current Gain IC = 1A f = 1.0MHz VCE = 3V 4 MHz Notes Notes (1) Pulse Width ≤ 300us, δ ≤ 2% S emelab Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 9017 Issue 1 Page 2 of 3 COMPLEMENTARY POWER DARLINGTON BDS28A/B/CM3A BDS29A/B/CM3A MECHANICAL DATA Dimensions in mm (inches) 13.59 (0.535) 13.84 (0.545) 3.53 (0.139) 3.78 (0.149) Dia. 6.32 (0.249) 6.60 (0.260) 1.02 (0.040) 1.27 (0.050) 30.35 (1 .1 95) 31.40 (1.235) 16.89 (0.665) 17.40 (0.685) 13.59 (0.535) 13.84 (0.545) 0.89 (0.035) 1.14 (0.045) 3.81 (0.150) BSC 20.07 (0.790) 20.32 (0.800) 3.81 (0.150) BSC 1 2 3 TO254 (TO-254AA) Pin 1 – Base Pin 2 – Collector Case is isolated Pin 3 – Emitter S emelab Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 9017 Issue 1 Page 3 of 3