BDX16AA

BDX16AA MECHANICAL DATA Dimensions in mm 3.68 (0.145) rad. max. 6.35 (0.250) 8.64 (0.340) 3.61 (0.142) 4.08(0.161) rad. PNP POWER TRANSISTOR 11.94 (0.470) 12.70 (0.500) 24.13 (0.95) 24.63 (0.97) 1 14.48 (0.570) 14.99 (0.590) 2 0.71 (0.028) 0.86 (0.034) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. 1.27 (0.050) 1.91 (0.750) TO66 Package. (TO-213AA) Pin 1 – Base Pin 2 – Emitter Case - Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VCER VCEX VEBO IC ICM IB Ptot TJ TSTG Rth-(j-c) Collector – Base Voltage (Open Emitter) Collector – Emitter Voltage (Open Base) Collector – Emitter Voltage Collector – Base Voltage Emitter – Base Voltage Collector Current Peak Collector Current tp = 1s Base Current Power Dissipation Storage Temperature Junction to Case. tcase = 25°C Maximum Junction Temperature RBE =100Ω VBE = 1.5V - 160V - 140V - 150V - 160V -7V -3A -4A -2A 25W 200°C –65 to 200°C 7°C / W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3367 Issue 1 BDX16AA ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter ICEX V(BR)CEO* V(BR)CER* V(BR)CEX* h21E* VCE(sat) VBE IEBO fT Collector Emitter Cut Off Current Collector Emitter Breakdown Voltage Collector Emitter Breakdown Voltage Collector Emitter Base Breakdown Voltage Collector Emitter Saturation Voltage Base Emitter Voltage Emitter Base Cutt-off Current Transition Frequency Test Conditions VCE = -140V IC = -100mA IC = -1mA IC = -1mA VBE = - 1.5V IC = - 0.5A IB = - 0.05A IC = - 0.5A IC = 0 IC = - 0.2A IC = - 0.5A VCE = - 4V VCB = -7V VCE = -10V f = 1MHz VBE = 1.5V Tcase = 150°C IB = 0 RBE = 100Ω Min. Typ. Max. -1 -5 Unit mA V V -140 -150 -160 20 250 -1 -1.7 -1 4 Static Forward Current Transfer Ratio VCE = - 4V — V V mA MHz * Pulse test tp = 300µs , δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3367 Issue 1