BFT36A

BFT36A MECHANICAL DATA Dimensions in mm(inches) PNP SILICON TRANSISTOR 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) FEATURES 6.10 (0.240) 6.60 (0.260) • FAST SWITCHING • HIGH PULSE POWER 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS 5.08 (0.200) typ. • POWER SWITCHING CIRCUITS 2.54 (0.100) 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) • MOTOR CONTROL 3 45° TO39 (TO205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC IB Ptot Tamb Tstg, Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Base Current Total Power Dissipation at Tcase ≤ 25°C Ambient Operating Temperature Storage Temperature - 100V - 80V - 5V - 3A - 2A 1W -55°C to +200°C -55°C to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3082 Issue 1 BFT36A ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter Static Value of Common h21E Test Conditions VCE = - 10V VCE = - 10V VCE = - 10V VCE = - 5V f = 20MHz VCB = - 80V IE = 0 t = 150°C VEB = - 4V IC = - 10mA IB = - 15mA IB = - 0.1A IB = - 15mA IE = 0 f = 1KHz IC = - 150mA IC = - 1A IC = - 150mA VCB = - 10V f = 1MHz IC = - 0.15 IC = - 2A IC = - 1mA IC = - 100mA Min. 50 15 20 50 Typ. Max. Unit 250 — Emitter Forward Current Transfer Ratio fT ICBO IEBO h21e VCE(sat)* VBE(sat)* C22b Transistion Frequency Collector Base Cut- Off Current. Emitter–Base Cut-off Current Small Signal Common Emitter Collector – Emitter Saturation Voltage* Base – Emitter Saturation Voltage* Common – Base Output Capacitance MHz - 100 - 100 - 100 nA µA nA — - 0.3 - 0.6 - 0.95 - 1.3 80 V V pF Forward Current Transfer Ratio VCE = - 5V 25 *Pulse Conditions: Pulse Length = 300µs duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3082 Issue 1