BSV64

BSV64 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) SILICON NPN PLANAR TRANSISTOR 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. FEATURES 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 • VCBO = 100V • VCEO = 60V • IC = 2A 45° Underside View TO39 PACKAGE (TO-205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector DESCRIPTION General Purpose NPN Transistor in a Hermetic TO39 Package ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCER VCEO VEBO IC ICM IB PTOT PTOT Tstg, Tj Rθj-c Rθj-a Collector – Base Voltage (open emitter) Collector – Emitter Voltage (RBE ≤ 50Ω) Collector – Emitter Voltage (open base) Emitter – Base Voltage (open collector) Collector Current (d.c.) Collector Current (peak value) Base Current (d.c.) Total Device Dissipation @ Tamb = 25°C Total Device Dissipation @ TCase = 50°C Storage Temperature Junction Temperature Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient 100V 80V 60V 5V 2A 5A 1A 0.87W 5W –65 to 200°C 175°C 25°C / W 172°C / W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3086 Issue 1 BSV64 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEsat VBEsat ICBO IEBO hFE cc fT ton toff Emitter – Base Saturation Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector Capacitance at f = 1MHz Transition Frequency at f = 20MHz Turn on Time Turn off time Test Conditions IB = 0.5A IB = 0.5A IE = 0 IC = 0 IC = 5A VCB =10V VCE =5V IC = 5A VCB = 60V VEB = 4V VCE = 2V IE = Ie Min. Typ. Max. Unit 1 1.8 10 10 V µA — 80 pF MHz 0.6 1.2 µs Collector – Emitter Saturation Voltage IC = 5A 25 70 100 =0 IC = 0.5A -VBEoff = 2V ICon = 5A; IBon = -IBoff = 0.5A Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3086 Issue 1