BUR52S

BUR52S MECHANICAL DATA Dimensions in mm(inches) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) HIGH CURRENT NPN SILICON TRANSISTOR FEATURES 38.61 (1.52) 39.12 (1.54) 0.97 (0.060) 1.10 (0.043) 29.9 (1.177) 30.4 (1.197) 22.23 (0.875) max. • FAST SWITCHING • HIGH PULSE POWER 16.64 (0.655) 17.15 (0.675) 1 2 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) APPLICATIONS • POWER SWITCHING CIRCUITS • MOTOR CONTROL TO-3 (TO-204AA) PACKAGE Pin 1 =Base Underside View Pin 2 = Emitter Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC ICM IB Ptot Tstg, Tj RθJC Collector – Base Voltage (IE= 0V) Collector – Emitter Voltage (IB= 0V) Collector – Emitter Voltage (IC= 0V) Collector Current Peak Collector Current (tp = 10 ms) Base Current Total Power Dissipation at Tcase ≤ 25°C Storage Temperature Max. Operating Junction Temperature Junction to Case Thermal Resistance 350V 250V 10V 60A 80A 16A 250W -65°C to +200°C 200°C 0.5°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5773 Issue 1 BUR52S ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(sus) V(BR)EBO ICEO ICBO IEBO VCE(sat)* VBE(sat)* ft ton tf ts Collector - Emitter Sustaining Voltage Emitter – Base Breakdown Voltage Collector Emitter Cut-off Current Collector -Base Cut-off Current Emitter–Base Cut-off Current Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage Transition Frequency Turn–On Time Fall Time Storage Time IC = 0 VCE = 250V VCE = 350V IE = 10mA IB = 0 IE = 0 TC = 125°C IC = 0 IC = 25A IC = 40A IC = 25A IC = 40A IC = 1A f = 1MHz IC = 40A VCC = 100V IC = 40A IB2 - 4A IC = 40A IB2 - 4A IB1 =4A VCC = 100V IB1 =4A VCC = 100V IB = 4A VEB = 7V IB = 2A IB = 4A IB = 2A IB = 4A VCE = 5V 1.5 10 0.3 0.2 1.2 0.7 Test Conditions IC = 200mA Min. 250 10 Typ. Max. Unit V V 1 0.2 2 0.2 1 1.5 1.8 2 16 1 0.6 2 µs mA mA µA V V MHz *Pulsed tp =300µs @< 1% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5773 Issue 1