BUV18

BUV18 BUV19 MECHANICAL DATA Dimensions in mm NPN HIGH CURENT SWITCHING TRANSISTORS Designed for high energy applications 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) requiring robust fast switching devices FEATURES 38.61 (1.52) 39.12 (1.54) 1.47 (0.058) 1.60 (0.063) 29.9 (1.177) 30.4 (1.197) 22.23 (0.875) max. 1 2 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) • • • • • Fast Switching Low VCE(SAT) High Switching Currents High Reliability Military Options Available 16.64 (0.655) 17.15 (0.675) APPLICATIONS TO–3 (TO-204AE) Pin 1 – Gate Pin 2 – Drain Case – Source • High Efficiency Converters • Motor Drive Control • Switching Regulator ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector-Emitter Voltage (IE=0) VCEO VEBO IC IC(PK) IB IB(PK) PTOT Tstg Tj RθJC Collector-Emitter voltage (IB=0) Emitter- Base Voltage (IC=0) Collector Current Peak Collector Current Base Current Peak Base Current Total Dissipation @ Tcase = 25°C Storage Temperature Range Maximum Operating Junction Temperature Thermal Resistance Junction – Case BUV18 120V 60V 7V 50A 90A 16A 40A 250W -65 to 200°C 200°C Max 0.7°C/W BUV19 160V 80V 7V 50A 70A 12A 30A Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5369 Issue 1 BUV18 BUV19 ELECTRICAL CHARACTERISTICS(Tcase = 25°C unless otherwise stated) Parameter Test Conditions IB = 0 IC = 0.2A L = 25mH IB = 0 L = 25mH IC = 40A VCE(sat)* Collector – Emitter Saturation Voltage IC = 80A IC = 30A IC = 60A VBE(sat)* V(BR)EBO ICEX IEBO fT ton tr ts ton tr ts Base – Emitter Saturation Voltage Emitter – Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current SWITCHING CHARACTERISTICS Transition Frequency Turn–On Time Fall Time Storage Time Turn–On Time Fall Time Storage Time f = 10MHz VCC = 60V IC = 80A IB1 = -IB2 = 8A VCC = 80V IC = 60A IB1 = -IB2 = 6A BUV19 VCE = 15V IC=2A BUV18 8 1.2 0.18 0.6 0.9 0.17 0.6 1.5 0.25 1.1 1.3 0.25 1.1 µs MHz IC = 80A IC = 60A IC = 0A IB = 4A IB = 8A IB = 3A IB = 6A IB = 8A IB = 6A IE = 50mA Tcase = 100°C VEB = 5V BUV18 BUV19 7 1.0 3.0 1.0 mA BUV19 BUV18 IC = 0.2A BUV19 Min. BUV18 60 V 80 0.6 1.5 0.6 1.2 2.2 2.0 V V V Typ. Max. Unit VCEO(sus)* Collector – Emitter Sustaining Voltage VBE = -1.5V VCE =VCEX IC = 0A NOTES * Pulse Test: tp = 300µs, δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5369 Issue 1