BUX81

BUX81 MECHANICAL DATA Dimensions in mm (inches) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) HIGH CURRENT HIGH SPEED HIGH POWER SILICON NPN PLANAR TRANSISTOR 38.61 (1.52) 39.12 (1.54) 0.97 (0.060) 1.10 (0.043) 22.23 (0.875) max. 7.92 (0.312) 12.70 (0.50) 29.9 (1.177) 30.4 (1.197) 16.64 (0.655) 17.15 (0.675) 1 2 Applications The BUX81 is an epitaxial silicon NPN planar transistor that has high current and high power handling capability and high switching speed. This device is especially suitable for switching – control amplifiers, power gates, switching regulators, power-switching circuits converters, inverters and control circuits.Other recommended applications include DC–RF amplifiers and power oscillators. 3 (case) 3.84 (0.151) 4.09 (0.161) TO–204AA (TO–3) PIN 1 — Base PIN 2 — Emitter Case is Collector. ABSOLUTE MAXIMUM RATINGS (Tj = 25°C unless otherwise stated) VCESM VCER VCEO IC ICM IB Ptot TSTG TJ Collector – Emitter Voltage Collector – Emitter Voltage Collector – Emitter Voltage(open base) Collector Current (d.c) Peak Collector Current Base Current (d.c) Total Power Dissipation Tmb = 50°C Storage Temperature Range Maximum Junction Temperature tp = 2ms VBE = 0 RBE = 100Ω 1000V 500V 450V 10A 15A 4A 150W -65 to +200°C +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5865 Issue 1 BUX81 ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise stated) Parameter V(BR)CEO V(BR)CER VCE(sat)* VBE(sat)* ICES IEBO fT Cobo Test Conditions IC = 100mA IB = 0 IC = 100mA IB = 0 IC = 5A IC = 8A IC = 5A IC = 8A VCE = 1000V IC = 0 IC = 0.5A IE = 0 IC = 5A IB1 = 1A IB = 1.0A IB = 2.5A IB = 1.0A IB = 2.5A VBE = 0 TC = +125°C VEB = 10V VCE = 10V VCB = 20V VCC = 250V IB2 = -2A RBE = 50Ω Min. 450 500 Typ. Max. Unit V V 1.5 3.0 1.4 1.8 1 3 10 mA mA MHz pF 0.5 3.5 0.8 µs V Collector - Emitter Breakdown Voltage Collector - Emitter Breakdown Voltage Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage Collector Cut-off Current Emitter Cut-off Current Transition Frequency Output Capacitance f=100kHz Turn–On Time Storage Time Fall Time 8 105 ton ts tf THERMAL CHARACTERISTICS Rth j-mb Thermal Resistance Junction to Case 1.65 °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5865 Issue 1