BUY47

BUY47 BUY48 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) HIGH VOLTAGE, HIGH CURRENT SILICON EXPITAXIAL PLANAR NPN TRANSISTOR 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS Intended for High Voltage, High Current, Switching Applications up to 7A. 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 45° TO–39 PACKAGE (TO-205AD) Underside View Pin 1 – Emitter Pin 2 – Base Pin 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC ICM Ptot TSTG TJ RθJA RθJC Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Peak Collector Current (repetitive) Total Power Dissipation Storage Temperature Range Maximum Operating Junction Temperature Thermal Resistance Junction - Air Thermal Resistance Junction - Case @Tamb = 25°C @Tcase = 25°C (IE = 0) (IB = 0) (IC = 0) BUY47 150V 120V 6V 7A 10A 1W 10W BUY48 200V 170V –65 to +200°C 200°C 175 °C/W 15°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3088 Issue 1 BUY47 BUY48 ELECTRICAL CHARACTERISTICS Parameter ICBO Collector Cut-off Current (Tcase = 25°C unless otherwise stated) Test Conditions VCB = 80V IE = 0 VCB = 100V IE = 0 IC = 1mA IE = 0 IC = 20mA IB = 0 IE = 1mA IC = 0.5A IC = 2A IC = 5A IC = 0.5A BUY47 TC = 125°C BUY48 TC = 125°C BUY47 BUY48 BUY47 BUY48 IC = 0 IB = 50mA IB = 0.2A IB = 0.5A IB = 50mA IB = 0.2A IB = 0.5A VCE = 5V VCE = 5V VCE = 5V VCE = 5V VCE = 10V VCB = 50V VCC = 40V Min. Typ. Max. Unit 10 1 10 1 µA mA µA mA V V V V(BR)CBO* Collector – Base Breakdown Voltage VCEO(sus)* Collector – Emitter Sustaining Voltage VEBO* VCE(sat)* Emitter – Base Voltage Collector – Emitter Saturation Voltage 150 200 120 170 6 0.05 0.45 1 0.8 1.1 1.5 130 40 40 15 150 130 45 90 45 80 1 2 V VBE(sat)* Base – Emitter Saturation Voltage IC = 2A IC = 5A IC = 50mA IC = 0.5A IC = 2A IC = 5A IC = 100mA IE = 0 f = 1MHz IC = 5A IB1 = –IB2 = 0.5A V hFE* DC Current Gain — fT CCBO ton toff Transition Frequency Collector – Base Capacitance Turn–On Time Fall Time MHz pF µs NOTES * Pulse Test: tp = 300µs, δ = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3088 Issue 1