BUY82X

BUY82X MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) NPN SILICON PLANER EPITAXIAL TRANSISTOR IN HERMETICALLY SEALED METAL CASE 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS Intended for High Voltage, High Current Switching Applications up to 10A 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 45° TO39 PACKAGE (TO205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25°C unless otherwise stated VCBO VCEO VEBO IC IB Ptot Collector - Base Voltage Collector - Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Continuous Collector Current Base Current Total Power Dissipation at Tcase = 25° C Tcase = 100° C Tamb = 25° C Junction Temperature Storage Temperature 150V 60V 7V 10A 2A 30W 15W 1W 175° C -65 to +175° C TJ Tstg Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7363, ISSUE 2 BUY82X THERMAL CHARACTERISTICS Rth j-case Rth j-amb Thermal resistance to case Thermal resistance junction to ambient Max. 5.0 150 Unit ° C/W ° C/W ELECTRICAL CHARACTERISTICS (Tcase=25°C unless otherwise stated) Parameter hFE* VCE(sat)* VBE(sat)* Forward-current transfer ratio Collector to Emitter Saturation Voltage Base to Emitter Saturated Voltage Test Conditions IC = 1.5A IC = 10A IC = 10A IC = 1.5A IC = 10A IC = 1.5A IE = 0 VCE = 5.0V IB = 1A IB = 150mA IB = 1A IB = 150mA VCB = 100V TCase = 150° C IC = 0 VEB = 5V Min. Typ. Max. 40 15 1.0 0.8 1.8 1.2 10 500 10 Unit V ICBO IEBO Collector to Base Cut-Off Current Emitter to Base Cut-Off Current µA DYNAMIC CHARACTERISTICS Ton Toff Cob Cib FT Turn-on time Turn-off time Output Capacitance VCC=30V, IC=5.0A, IB=0.5A VCC=30V, IC=5.0A, IB1=-IB2=0.5A IE = 0 f = 1.0MHz IC = 0 f = 1.0MHz IC = 100mA f = 20MHz VCE = 10V 20 VEB = 0.5V VCB = 10V 1.5 1.5 200 pF 1200 µs Input Capacitance Transition Frequency MHz * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7363, ISSUE 2